Zip Box Pro 4X5.65 (Swing Away) Is A Lightweight And Compact Mattebox That Holds Three 4X5.65 Filters, Attaches To 15Mm Lightweight Rods, Swings Away For Easy Lens Changes, And Has A Folding Top Flag Which Covers The Front Of The Mattebox For Protection During Packing. This System Can Also Be Adapted To Studio Rods By Adding A Lw 15Mm Adapter V2 (19Mm) Or Lw 15Mm Adapter V2 (15Mm Studio). Swing Away Bracket Includes Ability To Tilt By Loosening Two Screws On The Side. The Same Two Screws Also Allow For Vertical Adjustability Of 4Mm Up And 4Mm Down From The Lens Center. One Or Two Filters Can Also Be Tilted By Offsetting Them In The Filter Tray And Leaning Them Back Into The Housing. Filters Are Loaded From The Front Of The Mattebox And Are Securely Held By A Spring Loaded Latch. Top Flag Is Made Of Lightweight Carbon Fiber And Covers The Front Of The Mattebox Which Is Great For Protecting The Lens Between Takes. The Flag Can Be Removed By Loosening The Top Thumbscrew, Aligning The Tab With The Key Slot, And Pulling Out. Rear Opening Of The Swing Away Back Is 114Mm And Snap-In Reduction Rings Are Included For Common Lens Barrel Diameters Of 110Mm, 104Mm, 95Mm, 87Mm, And 80Mm. A Universal Cloth Donut Is Also Included For Non-Standard Lens Diameters Or Lenses That Have A Moving Front While Focusing. The Cloth Donut Should Also Be Used When Tilting The Zip Box Pro Using The Swing Away Bracket. If Clamp On Version Is Desired, Swing Away Back Can Be Removed By 4 Screws And Replaced With Clamp On Backs With Sizes 114Mm, 110Mm, 104Mm, 100Mm, 95Mm, 87Mm, And 80Mm. Includes: Mattebox With Three 4X5.65 Filter Stages, Swing Away Back, Top Flag, Cloth Donut, Swing Away Reduction Rings Set. Specifications: Weight: 467.2G (1.03 Lbs) Dimensions: 228.6 X 76.2 X 203.2 Mm (9 X 3 X 8 In)
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the Wooden Camera Zip Box Pro?A: The dimensions are two hundred twenty-eight point six millimeters by seventy-six point two millimeters by two hundred three point two millimeters.
Q: How much does the Wooden Camera Zip Box Pro weigh?A: It weighs four hundred sixty-seven point two grams, which is approximately one point zero three pounds.
Q: What material is the Wooden Camera Zip Box Pro made of?A: The primary material is carbon fiber, providing lightweight durability for professional use.
Q: How many filters can the matte box hold?A: It can hold up to three filters measuring four by five point six five inches.
Q: What is the rear opening size of the swing away back?A: The rear opening measures one hundred fourteen millimeters.
Q: What types of lens diameters are compatible with this matte box?A: It supports common lens diameters of one hundred ten millimeters, one hundred four millimeters, ninety-five millimeters, eighty-seven millimeters, and eighty millimeters.
Q: How do I install the Wooden Camera Zip Box Pro?A: To install it, attach the matte box to fifteen millimeter lightweight support rods and secure the filters in the filter tray.
Q: Can I use this matte box with studio rods?A: Yes, it can be adapted to studio rods by adding compatible LW fifteen millimeter adapters.
Q: Is the Wooden Camera Zip Box Pro suitable for beginners?A: Yes, it is user-friendly and designed for both beginners and professionals in the film industry.
Q: How do I keep the Wooden Camera Zip Box Pro clean?A: Clean it with a soft, dry cloth to avoid scratches and store it in a protective case when not in use.
Q: Can I use the filters in a tilted position?A: Yes, you can tilt one or two filters by offsetting them in the filter tray.
Q: What should I do if my matte box arrives damaged?A: Contact the seller immediately for assistance with returns or exchanges if it arrives damaged.
Q: Does the Wooden Camera Zip Box Pro come with a warranty?A: Yes, it typically includes a manufacturer's warranty, but check with the retailer for specific details.
Q: What types of lenses can be used with the included cloth donut?A: The cloth donut is designed for non-standard lens diameters or lenses that have a moving front while focusing.
Q: Is the top flag removable?A: Yes, the top flag can be removed by loosening the thumbscrew and pulling it out carefully.