Need To Know Before Buying This Remote Control Kit Not Have The Function Of Reversal For The Fan. The Light Dimmer Is Compatible With Dimmable Led And Incandescent Light Bulbs, Non-Dimming Bulbs And Cfl Bulbs Only Have The On/Off Function. If Your Fan Have Pull Chain Switch, Before Using The Wireless Remote Control, Use The Switch To Turn The Fan Speed To Maximum And Turn The Fan Light On. In This Way The Switch And The Wireless Remote Control Can Be Used Together. Trouble Shooting Guide 1. Fails To Operate A. Power To Receiver? B. Receiver Wired Correctly? C. Fan Manual Speed Control In Highest Position D. Light Kit Switch Turned On? E. Good Battery In The Transmitter? F. Code Set At Exact Same Positions In Both Transmitter And Receiver? 2. Won'T Operate At Distance If Transmitter Operates Fan/Light Kit When Up Close, But Not At 20 Feet Away. Try Placing The Brown Antenna Wire Higher, Up Through Ceiling/Outside The Junction Box. Package Included : 1 X Transmitter 1 X Receiver 6 X Plastic Wire Connector 2 X Screws 1 X Manual Notice ! Your Ceiling Fan And Light Kit Assembly Must Meet The Following Requirements: 1. Do Not Use With Solid State Fans. 2. Electrical Rating: 120V 60Hz 3.5A Max. Motor Amps: 1.0 Max. Light Watts: 240-(Incandescent Or Ballast Non-Dimmer)
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the Universal Ceiling Fan Remote Control Kit?A: The dimensions are six point eleven inches in length, four point ninety-eight inches in width, and one point five inches in height.
Q: What material is the remote control kit made of?A: The remote control kit is made of plastic, ensuring durability and lightweight handling.
Q: What is the electrical rating of the receiver?A: The receiver is rated for one hundred twenty volts, sixty hertz, and three point five amps.
Q: How do I install the Universal Ceiling Fan Remote Control Kit?A: To install, first ensure the fan is switched off. Connect the receiver to the fan’s wiring according to the manual, then mount the receiver in the ceiling junction box.
Q: Is this remote control compatible with my ceiling fan?A: Yes, the remote control kit is compatible with most major one hundred ten to one hundred twenty volt three-speed AC ceiling fans, including brands like Harbor Breeze and Hampton Bay.
Q: Can I use this remote control with a hugger style fan?A: No, this remote control kit is not recommended for use with hugger style ceiling fans.
Q: How do I keep the remote control in good condition?A: Keep the remote control dry and avoid exposing it to extreme temperatures. Replace the nine volt battery as needed to ensure optimal performance.
Q: What should I do if the remote control stops working?A: First, check if the battery needs replacing. Ensure the receiver is properly wired and that the fan speed is set to maximum using the pull chain switch.
Q: Is there a warranty for the remote control kit?A: Yes, the product typically comes with a manufacturer's warranty; please refer to the packaging for specific terms and conditions.
Q: What if the remote control arrives damaged?A: If the remote control arrives damaged, contact customer support for assistance with returns or exchanges.
Q: Can I use this remote control with dimmable LED lights?A: Yes, the remote control can dim compatible dimmable LED lights. However, non-dimming bulbs will only function with on/off control.
Q: How many speeds does the fan remote control offer?A: The fan remote control offers three speeds: high, medium, low, and an off setting.
Q: Does the remote have a reverse function?A: No, the remote control does not have a reverse function for the fan.
Q: Is this remote control kit FCC approved?A: Yes, the remote control kit is FCC and UL listed, ensuring compliance with safety standards.
Q: What is included in the package of the remote control kit?A: The package includes one transmitter, one receiver, six plastic wire connectors, two screws, and one manual.