Model: Sw-102S Features: 1 Vswr. Forward And Reflected Power Direct Digital Readout, Without Any Calibration. 2. Maximum Measurable Power Range Up To 120W. 3 Low Insertion Loss (0.3 Decibels Or Less) Structure Allows It To Be Permanently Connected. 4.Build In Frequency Country. 5. All Funtion Display ( Frequency,Power , Swr,Fw,Rw,Battery Level)
Specifications: Frequency Range: 1025 - 525Mhz Measurable Power Range: 1 - 120W(+-0.5%) Input Frequency Counter (Min 0.5 W Input) Maximum Power: 120W Impedance: 50O Size: W 76 X H 77 X D35 Mm. Weight: < 220 Grams Battery : 3.7V Li-Ion Rechargeable Battery Interface: So239 Interface Max. Power In: 120 W (Measurable Power,Radio Must Be Analog) V.S.W.R: 1.00~19.9 Frequency Ranger: Cover : 100Mhz~520Mhz Insertion Loss: < 0.15Db(Vhf) , < 0.25Db(Uhf) Temperature: 0?~60? Frequency Counter: Yes ( Tx Input Must Be Minimum 0.5W + - 0.5%) Battery Voltage Display: Yes Battery Build-In: 600 Mah Li-Ion Battery Auto Power Off: 1-9 Mins Size: 66*68*37 (Mm) Charger In: 5V (Micro Usb) Backlight: Auto Off 1-9 Mins Interface (In And Out ): So239 Weight: 220G (Include Battery)
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the Surecom Gam3Gear SW-102S?A: The dimensions are two point six inches by one point four six inches by two point six eight inches.
Q: What is the weight of the SW-102S meter?A: The weight is two hundred twenty grams, including the battery.
Q: What frequency range does the SW-102S cover?A: The frequency range is from one hundred twenty-five megahertz to five hundred twenty-five megahertz.
Q: What is the maximum measurable power of the SW-102S?A: The maximum measurable power is one hundred twenty watts.
Q: What type of battery does the SW-102S use?A: It uses a three point seven volt lithium-ion rechargeable battery.
Q: How do I use the SW-102S power meter?A: Connect the SW-102S to your radio using the SO239 interface and read the power and SWR values directly on the display.
Q: Is the SW-102S compatible with digital radios?A: No, the SW-102S is not compatible with digital radios; it is designed for analog use.
Q: What safety precautions should I take when using the SW-102S?A: Ensure the radio's power does not exceed one hundred twenty watts to avoid damaging the meter.
Q: How do I care for the SW-102S meter?A: Keep the meter dry and store it in a cool, dry place to prolong its lifespan.
Q: Can the SW-102S be permanently connected to my setup?A: Yes, the low insertion loss structure allows it to be permanently connected to your equipment.
Q: What is the insertion loss specification for the SW-102S?A: The insertion loss is less than zero point three decibels.
Q: How do I charge the SW-102S battery?A: Use the provided micro USB charger to charge the built-in six hundred milliamp hour battery.
Q: What happens if the SW-102S arrives damaged?A: Contact the seller immediately to initiate a return or exchange process.
Q: How long does the battery last on the SW-102S?A: Battery life can vary, but it is rechargeable and designed for regular use.
Q: Does the SW-102S have an auto power-off feature?A: Yes, the auto power-off feature can be set for one to nine minutes.
Q: What is the V.S.W.R range of the SW-102S?A: The V.S.W.R range is from one point zero to nineteen point nine.