Key Features: 1. Specially Designed For Dji Rs 4 / Rs 4 Pro / Rs 3 / Rs 3 Pro / Rs 3 Mini / Rs 2 / Rs C2 / R S / R Sc And Installed Onto The Side Nato Rail; 2. Quick Switch Between Landscape And Portrait Modes For Easy Shooting Or Monitoring; 3. Free Adjustment Via Three Rotary Joints; 4. Well-Spaced Threaded Holes To Facilitate The Installation Of Power Bank Holders 2336 / 2790. Description Smallrig Phone Holder For Dji Gimbals 4301 Is Specially Designed For Dji Rs 3 / Rs 3 Pro / Rs 3 Mini / Rs 2 / Rs C2 / R S / R Sc And Installed Onto The Side Nato Rail Through M4 Screws. When Not In Use, Release The Cold Shoe Mount To Detach Your Phone. The Phone Holder Can Be Mounted On The Top Of A Camera With A 1/4-20 Screw And Supports Phones With A Width Of 57-88Mm / 2.5-3.5In. Quick Switching Between Landscape And Portrait Modes And Easy Angle Fixing With More Than 90 Rotating. There Is A 1/4-20 Threaded Hole At The Bottom For Rs 3 Mini Or Tripod, And A Cold Shoe Mount On Top For Microphone Or Light. Note: 1.Load-Bearing Capacity: 500G / 17.6Oz 2.Please Note, The Arrow Must Point Up While Installing The Cold Shoe 3. When In Portrait Mode, The Phone May Block The Gimbal Axis Rotation. Compatibility: For Dji Rs 3 For Dji Rs 3 Pro For Dji Rs 3 Mini For Dji Rs 2 For Dji Rsc 2 Forronin Sc For Ronin C Package: Phone Holder X 1 Cold Shoe Mount X 1 M4 Screw X 2 1/4-20 Screw X 1 Allen Wrench X 2 Specifications Product Dimensions: 110 X 31.3 X 41.3Mm / 4.3 X 1.2 X 1.6In Package Dimensions: 155 X 81.5 X 42Mm / 6.1 X 3.2 X 1.7In Product Weight: 1015.0G / 3.60.2Oz Package Weight: 1415.0G / 5.00.2Oz Material(S): Aluminum Alloy, Stainless Steel, Silicone Elated Products 4118, 3028C, 4383, 4197, 4195, 3252, 2786B
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the SMALLRIG Universal Phone Tripod Mount?A: The dimensions are four point three inches by one point two inches by one point six inches.
Q: What is the weight of the SMALLRIG Universal Phone Tripod Mount?A: The product weight is approximately three point six ounces.
Q: What materials are used in the SMALLRIG Universal Phone Tripod Mount?A: It is made of aluminum alloy, stainless steel, and silicone.
Q: What is the load-bearing capacity of this phone mount?A: The load-bearing capacity is five hundred grams, which is about seventeen point six ounces.
Q: How do I install the SMALLRIG Universal Phone Tripod Mount?A: You can install it onto the side NATO rail of DJI stabilizers using M4 screws.
Q: Is the SMALLRIG Universal Phone Tripod Mount compatible with all smartphones?A: No, it supports smartphones with a width between fifty-seven millimeters to eighty-eight millimeters.
Q: Can I switch between landscape and portrait modes easily?A: Yes, you can quickly switch between landscape and portrait modes.
Q: How do I detach my phone from the mount?A: You can release the cold shoe mount to easily detach your phone.
Q: What should I do to keep the SMALLRIG mount in good condition?A: Ensure that the arrow points up while installing the cold shoe for proper usage.
Q: Is there any specific care required for the SMALLRIG phone mount?A: There are no special care instructions; just ensure it is kept clean and free from dust.
Q: What should I do if the SMALLRIG mount arrives damaged?A: Contact customer support for assistance with returns or replacements.
Q: Does the phone mount come with any additional accessories?A: Yes, it includes a cold shoe mount, M4 screws, and an Allen wrench.
Q: Can I use this phone mount with DJI RS 3 mini?A: Yes, it is compatible with DJI RS 3 mini and other DJI stabilizers.
Q: What features does the SMALLRIG phone mount offer for stability?A: It has well-spaced threaded holes for securing additional accessories like power bank holders.
Q: Does the SMALLRIG phone mount support microphone or light attachment?A: Yes, it has a cold shoe mount on top for attaching a microphone or light.