The Skar Audio Ddx-10 D2 Is A Competition Grade, 10-Inch, Dual 2-Ohm, Car Subwoofer. The Ddx Line-Up Was Engineered By Skar Audio To Be An Spl Grade Woofer That Could Also Be Utilized In Daily System Applications, Allowing Non-Competitors To Use The Same Subwoofers As Those Competing In The Lanes. Every Component Used In The Design Of These Woofers Is Of The Highest Quality For Reliability And Increased Performance.Conservatively Rated At A 1,500 Watts Peak Power And 1,000 Watts Rms Power, This Subwoofer Was Engineered To Be Extremely Loud. Featuring A Massive Double Stack Motor (202 Oz), 2.5'' Pure Copper High Temperature Voice Coil, And A Competition Grade Pressed Paper Cone Stitched To The High Roll Foam Surround, The Woofer Comes Equipped Ready To Handle Serious Amounts Power. Dual 2-Ohm Voice Coil Configuration.Specifications - Peak Power: 1,500 Watts, Rms Power: 1,000 Watts. Sensitivity (Spl): 85.2 Db, Frequency Response: 40 - 500 Hz, Fs: 46 Hz, Qts: 0.38, Qms: 4.8, Qes: 0.41, Bl: 24.8 N/A, Vas: 8.7 L. Subwoofer Mounting Depth: 6.10'', Subwoofer Cut-Out Diameter: 9.25''.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the Skar Audio DDX-10 D2 subwoofer?A: The dimensions of the Skar Audio DDX-10 D2 are fourteen inches in length, fourteen inches in width, and eleven inches in height.
Q: What is the peak power output of this subwoofer?A: The peak power output of the Skar Audio DDX-10 D2 is one thousand five hundred watts.
Q: What is the RMS power rating for the DDX-10 D2?A: The RMS power rating for the Skar Audio DDX-10 D2 is one thousand watts.
Q: What type of voice coil does the DDX-10 D2 use?A: The DDX-10 D2 features a high temperature two point five inch pure copper voice coil.
Q: What is the sensitivity rating of this subwoofer?A: The sensitivity rating of the Skar Audio DDX-10 D2 is eighty-five point two decibels.
Q: What is the frequency response range of the DDX-10 D2?A: The frequency response range of the Skar Audio DDX-10 D2 is from forty hertz to five hundred hertz.
Q: How do I install the Skar Audio DDX-10 D2 subwoofer?A: To install the DDX-10 D2, you need to securely mount it in a compatible enclosure and connect it to your audio system.
Q: Is this subwoofer suitable for daily use?A: Yes, the Skar Audio DDX-10 D2 is engineered for both competition and daily system applications.
Q: How do I connect the DDX-10 D2 to my car audio system?A: To connect the DDX-10 D2, use appropriate gauge wiring and connect the dual two ohm voice coils to your amplifier.
Q: What is the mounting depth required for the DDX-10 D2?A: The mounting depth required for the Skar Audio DDX-10 D2 is six point ten inches.
Q: How should I care for the DDX-10 D2 subwoofer?A: To care for the DDX-10 D2, avoid exposing it to moisture and ensure proper ventilation during use.
Q: What type of enclosure is best for the DDX-10 D2?A: The Skar Audio DDX-10 D2 performs best in a properly sized vented or sealed enclosure.
Q: Can I return the DDX-10 D2 if I encounter issues?A: Yes, you can return the Skar Audio DDX-10 D2 if it arrives damaged or defective, subject to the return policy.
Q: What should I do if the subwoofer does not produce sound?A: If the DDX-10 D2 does not produce sound, check the wiring connections and ensure that the amplifier is functioning properly.
Q: Is there a warranty for the Skar Audio DDX-10 D2?A: Yes, the Skar Audio DDX-10 D2 typically comes with a manufacturer's warranty, which may vary by retailer.