PLEASE DONT STICK IT ON PHONE DIRECTLY IMPORTANT: Please follow the instructions to ensure proper installation! The industrial standard 3M-4930 adhesive is one-time-use only. Even if the adapter is attached wrongly, do NOT remove and re-attach as the adhesive strength will be affected. Carefully attach the adapter to the center of the phone case and align it with the longer side of the case. Be aware that the adapter is not compatible with silicone, rubber, wood, heavily textured or rounded surface phone cases. Follow below steps to attach the adapter 1. Clean the phone case surface thoroughly and let it dry. 2. Stick the adapter vertically in the center of the phone case. 3. Press the adapter so that it is sticked on the phone case firmly. 4. Allow the adhesive to dry for 24 hours before using. WARM TIPS The 3M VHB adhesive which will adhere to smooth, but not textured, non-porous surfaces such as plastic and metal. 2. It will NOT adhere to rubber, silicone, TPU or soft-touch coatings. 3. Make sure that the application surface is thoroughly cleaned and dry before you apply the adapter. 4. Let the adhesive on for 24 hours before use dry. 5. The 3M VHB adhesive is a disposable adhesive. It is NOT reusable.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
