We will send you an email to reset your password.
Vendor: 3D Resin Solutions
Type: 3D Resin
Sku: MG2-13-4_4
Availability: In Stock
Couldn't load pickup availability
Sold by Electroeshop, an authorized reseller.
Returns accepted within 30 days | support@electroeshop.com
Shipping calculated at checkout
Shipping cost and estimated delivery for this item will be shown at checkout based on your location.
Returns accepted within 30 days of delivery.
Damaged or Defective Item
Free return shipping + replacement or full refund
Wrong Item Received
Free return shipping + replacement or full refund
Change of Mind
Return shipping at customer's expense · 25% restocking fee applies
RPG Resin for tabletop games. It's an affordable, high detail, ABS style resin that's great for miniatures and models. Want the ultimate tabletop experience? Step up to HERO HD.
NEW FORMULA, updated February 2025 with support and feedback from our community.
Table Top RPG 3D Printing Resin is made for building your worlds with precision and durability. Here's what you get:
The medium grey finish makes detail pop. It's a good base for painting, and it still looks sharp if you leave it unpainted.
Dungeon Master, collector or hobbyist, RPG Resin gives you tough, good looking prints that hold up to the adventure.
Level up your printing and support a United States manufacturer!
| Tensile Strength | 3,500 to 4,000 (psi) |
| Elastic Modulus | 210k to 250k (psi) |
| Elongation at break | 20 to 25% |
| Shore D | 75 |
| Linear Shrink | < 2 % |
| UV Peak Absorption | 405nm |
| Work (j) | 7 |
NOTE: Parts printed with UV resins are not meant for direct food contact and are not safe to put in your mouth, even when properly dried and cured. Don't print anything for a person or pet who might chew on it or swallow it.
Storage and use
1. Store it somewhere cool and dark, between 18 and 28°C. Keep the container out of the light so the resin doesn't get light contaminated.
2. Keep it out of direct sunlight while you work. Read the safety info (link above) before handling. Proper ventilation is required. HMIS Protection: H
3. Keep it away from children, and shake well before use.
4. After printing, clean your prints in high purity IPA or Rhino Resin Cleaner.
5. Use it at 18 to 28°C.
What printers does it work with?
RPG is made for resin printers that use 405 nm light. On most mono screen printers, start around 2.5 to 3 seconds normal exposure.
Is it good for minis that get handled a lot?
Yes. RPG is a non brittle, ABS style resin with 20 to 25% elongation at break, so it holds up well for minis, monsters and scenery. If your minis get handled at the table every week, HERO HD is our toughest tabletop resin.
Is it good for painting?
Yes. The medium grey makes detail easy to see and gives you a good base for painting. It still looks sharp left unpainted, too.
How do I clean prints?
Use high purity IPA or Rhino Resin Cleaner. That gets you a smooth, tack free surface.
Is it made in the USA?
Yes. We make RPG in South Elgin, Illinois, USA, in an ISO 9001:2015 certified facility.
Does shipping cost extra?
You get free Standard shipping in the lower 48 on orders of $44 and up. Smaller orders, and anything going outside the lower 48, pay the rate shown at checkout.
⚠️ WARNING (California Proposition 65):
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information, please visit www.P65Warnings.ca.gov.