From The Manufacturerfront Viewclick Here For A Larger Image Connection Diagramclick Here For A Larger Image Stereo Power Amplifierclick Here For A Larger Image Back Viewclick Here For A Larger Image The Ultimate Stereo Power Amplifierthis Amplifier Gives You The Power And Versatility You Need To Create A Professional Sound System. Its Wide Frequency Response Makes It Suitable For Amplifying Any Type Of Audio Including Music Or Vocals. It Can Be Used In Meeting Halls, Restaurants, Schools, Stores, And At Home --The Perfect Solution For Paging Systems Anywhere. Get The Power You Need With 2 X 75 Watt To Handle All Your Audio Needs. 110/220 Voltage Selectorthis Amplifier Has Selectable Input Voltage From 110 V/60 Hz (The Standard In Usa And Canada) To 220 V/50 Hz (For European Operation). Please Make Sure The Switch Is In The Proper Position Before Operating. Compatibilitycompatible With Cd Players, Walkmans, And Computerized Devices, Including Mp3S, Via 3.5 Millimeter To Rca Converter. Rca L/R Line Inputlets You Connect The Desired Line Input Source. Take Controluse The Control Center Panel Located On The Face Of The Unit To Make Adjustments To Microphone Volume, Master Volume, Balance, Bass, And Treble. Push Type Speaker Terminalslets You Easily Connect Speaker Wires Directly To The Amplifier. Replaceable Power Fusethe Amplifier Uses A Fuse For Protection Against Surges And Short Circuit. If The Amplifier Suddenly Turns Off And Will Not Turn On, Check The Fuse And Replace It If Necessary. (Replacement Fuse To Use: 1.5-Amp, 250-Volt, Fast-Acting 5 X 20 Millimeter Fuse --Not Included) Additional Features Harmonic Distortion: 0.3% 2 X 75 Watt Rms At 4 Ohm Blue Led Output Level Display Frequency Response: 20 Hz-40 Khz Power Fuse: 1.5 A, 250V Fast-Acting (5 X 20 Millimeter) Power Requirement: 120 V Ac 50 Hz/230 V Ac 50 Hz Tone Controls: Bass And Treble: +/-10Db (100 Hz/10 Khz) Dimensions: 8.27 X 2.72 X 5.39 Inch (190 X 70 X 137 Millimeter)Product Descriptionpylehome Model : Pca3Stereo Power Amplifier, 2 X 75 Wattstereo Power Speaker Amplifier - Compact Audio Control Amp System, Rca Input, 150-Watt Maxrca Jack Input 2 X 75 Watt Max Power Push Type Speaker Outputs Blue Led Output Level Display Power On/Off Switch And Led Indicator Treble, Bass And Master Volume Controls Compatible With Audio/Computerize Devices (Mp3 Players) Via 3.5Mm To Rca Converter Dimensions: 7.48''W X 2.87''H X 5.39''Dthis Mini Stereo Power Amplifier Provides Up To 75 W Of Power On Each Channel At 4 Ohms. Connect Your Inputs Using The Rca Jacks. Outputs Over Standard Speaker Push Jacks. It'S Compatible With Any Audio Or Computer Device - You Can Even Hook Up An Ipod Using A 3.5Mm To Rca Jack Converter. Treble, Bass, And Volume Controls On The Front Let You Tweak Your Sound To Exactly How You Want It. Runs On 110 Or 220 V.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the Pyle PCA3 amplifier?A: The dimensions of the Pyle PCA3 amplifier are eight point two seven inches in length, two point seven two inches in height, and five point three nine inches in width.
Q: What type of power does the Pyle PCA3 amplifier use?A: The Pyle PCA3 amplifier operates on one hundred twenty volts AC fifty hertz or two hundred thirty volts AC fifty hertz.
Q: How much power does the Pyle PCA3 amplifier provide?A: The Pyle PCA3 amplifier provides two times seventy-five watts RMS at four ohms.
Q: How do I connect audio devices to the Pyle PCA3 amplifier?A: You can connect audio devices using the three point five millimeter to RCA converter for compatibility with various devices, including CD players and MP3 players.
Q: Can the Pyle PCA3 amplifier be used for home theater systems?A: Yes, the Pyle PCA3 amplifier is suitable for home theater systems, providing high-quality sound for music and movies.
Q: Is the Pyle PCA3 amplifier easy to install?A: Yes, the Pyle PCA3 amplifier features push type speaker terminals, making it straightforward to connect speaker wires directly to the amplifier.
Q: How do I adjust the sound on the Pyle PCA3 amplifier?A: You can adjust the sound by using the control center panel on the unit, which includes knobs for volume, bass, treble, and balance.
Q: Is the Pyle PCA3 amplifier suitable for outdoor use?A: No, the Pyle PCA3 amplifier is designed for indoor use, such as in homes, schools, and restaurants.
Q: How should I clean the Pyle PCA3 amplifier?A: To clean the Pyle PCA3 amplifier, use a soft, dry cloth to wipe the exterior and ensure no moisture enters the device.
Q: What should I do if the Pyle PCA3 amplifier won't turn on?A: If the Pyle PCA3 amplifier won't turn on, check the power fuse and replace it if necessary with a one point five amp, two hundred fifty-volt, fast-acting fuse.
Q: Does the Pyle PCA3 amplifier come with a warranty?A: Yes, the Pyle PCA3 amplifier typically comes with a warranty, but it is advisable to check with the retailer for specific details.
Q: Can I use the Pyle PCA3 amplifier with Bluetooth devices?A: No, the Pyle PCA3 amplifier does not support Bluetooth connectivity; it requires wired connections via RCA inputs.
Q: What is the total weight of the Pyle PCA3 amplifier?A: The total weight of the Pyle PCA3 amplifier is approximately six pounds.
Q: Is the Pyle PCA3 amplifier compatible with all speaker types?A: The Pyle PCA3 amplifier is compatible with speakers that have an impedance of four to eight ohms.
Q: Can I use the Pyle PCA3 amplifier for karaoke?A: Yes, the Pyle PCA3 amplifier can be used for karaoke, as it allows for microphone volume adjustments and has a suitable power output.
