Polymaker PolyLite PETG 3D Printer Filament 1.75mm - Light Up Your Daily Life! PETG 1.75mm Filament Key Product Feature Excellent all-rounder Good layer adhesion Easy to print Better heat and impact resistance than PLA (also higher printing and bed temperature needed) Good light diffusion (Clear PETG Filament/Transparent PETG) Consistent color and dimensional accuracy realized with CCD line sensor technology; Carefully winded and dried and vacuum-sealed in a resealable ziplock bag with desiccant, no tangle or moisture issue; Cardboard spool and box are made of recycled materials that can be recycled directly after use, helping lessen plastic waste. PETG 3D Printing Filament 1.75mm Printing Settings: Nozzle: 230C - 240C; Bed: 70C - 80C; Speed: 30mm/s - 50mm/s; Fan: Turn off-20% (LOW for better surface quality; OFF for better strength). Tips: Please pass the PETG filament 1.75 through the fixed hole to avoid tangles after use. PETG 3D Filament Specs: Material: Polyethylene Terephthalate Glycol N.W: 1kg/Spool Filament Diameter: 1.75mm Spool Type: Recycled cardboard Dimensional Accuracy: 70% is within +/- 0.01, 97% is within +/- 0.02, 99% is within +/- 0.03, 99.9% is within +/- 0.04
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
