PETG filaments are made of premium PETG plastic which combines the advantages of other filaments such as safe and odorless; little shrinkage rate; high impact strength and good liquidity (flows smoothly); Furthermore, this beautiful PETG filaments make prints come out with a little shine or spark to it.Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied.FAQs:Why cant the filaments stick to the build bed?1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA;2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;4. If the effect is not good, it is recommended to try printing the draft before printing.Specification: Temperature Recommended Extrusion/Nozzle Temp: 230C - 250C (446?~ 482?)Heated Bed Temp: 80C - 90C (176?~ 194?)Filaments Diameter and Accuracy: 1.75 mm +/- 0.02 Recommended Printing Conditions:Cooling Fan: Turned onPrinting Speed: 30~50(mm/s)Raft Separation Distance: 0.14(mm)Retraction Distance: 1~3 mm(Note:Based on 0.4 mm nozzle and simplify 3D V 4.0.; Printing conditions may vary with different nozzle diameters.)Packaging Included:1 spool of PETG filaments 
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
