Package Including: 1 X Automatic Doors Motion Sensor(Black) 2 X Mounting Screws 1 X English User Manual
It'S Working Logic: It Work As A Connection Switch, When Detect Person Walking Close , It'S No And Com Terminal Connect And Trigger Door Open. If You Want To Use As Nc(Normal Close) And Com, Need To Add One Extermal Small Module,We Will Send To You.
Exit Motion Sensor: When Walk Close To Door, It Will Detect Person And Trigger To Open Lock Automatically. High-Sensitivity, Quick And Accurate Response. Specially Apply In Commercial, Industrial And Demanding Of Automatic Access Area. Technology:24G Microwave Abd Microprocessor Max Mounting Height:3-4M Detection Area:4M(W)X2M(D) Detection Mode: Movement
Technical Data: 1. Microwave Sensor With Frequency Of 24.125Ghz; 2. Sending Power: Less Than 20 Dbm Eirp; And Signal Density: Less Than 5 Mw Per Square Meter; 3. Mounting Height: 4 Meters; Mounting Angle: 0 To 90 Degree (Vertically) Or -30 To +30 Degree (Horizontally); 4. Detection Model: Motion Detection; 5. Connection Voltage: Ac42V Tp Dc60V; 6. Current: 2W, 7. Detetion Time: 0.5Seconds; 8. Ip54; 9. Standard Voltage: Dc12V To 36V; 10. Material: Abs; 11. Dimension : 110 X 80 X 50Mm 12. Weight : 0.22Kg
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the MENGQI-CONTROL Request to Exit PIR Motion Sensor?A: The dimensions are one hundred ten millimeters in length, eighty millimeters in width, and fifty millimeters in height.
Q: What is the weight of this motion sensor?A: The weight of the sensor is zero point twenty-two kilograms.
Q: What is the maximum mounting height for this sensor?A: The maximum mounting height is four meters.
Q: What type of technology does this sensor use?A: It uses twenty-four gigahertz microwave technology combined with a microprocessor for detection.
Q: What is the detection area of this motion sensor?A: The detection area is four meters wide and two meters deep.
Q: How do I install the MENGQI-CONTROL motion sensor?A: To install, mount the sensor at a height of three to four meters using the included mounting screws.
Q: Is this sensor suitable for residential use?A: Yes, it is suitable for both residential and commercial use, particularly for automatic door access control.
Q: How does the motion sensor work?A: The sensor detects movement and triggers the door to open automatically when someone approaches.
Q: Can I use this sensor in outdoor settings?A: Yes, the sensor has an IP54 rating, making it suitable for outdoor use in protected areas.
Q: How should I clean the motion sensor?A: To clean the sensor, use a soft, dry cloth to avoid damaging its surface.
Q: What is the recommended voltage for this sensor?A: The recommended connection voltage ranges from AC forty-two volts to DC sixty volts.
Q: Does this sensor require a special module for NC operation?A: Yes, to use the sensor in NC mode, an additional external module is required.
Q: What if my sensor arrives damaged?A: If the sensor arrives damaged, please contact customer support for return or replacement options.
Q: Is there a warranty for the MENGQI-CONTROL PIR motion sensor?A: Yes, the sensor comes with a manufacturer's warranty for quality assurance.
Q: What should I do if the sensor does not detect motion?A: If the sensor does not detect motion, check the installation height and ensure it is within the specified range.
