Product Introduction: Suitable For Controlling Various Access Control Controllers And Building Intercom Equipment, Especially Suitable For Various Types Of Electric Locks. Can Be Connected To Various Normally Open (No) Or Normally Closed (Nc) Electric Locks. The Electric Lock Can Be Directly Controlled Through The Signal Line (Push) Or Other Switch Signal Output Of The Access Control Controller, Which Can Reduce The Compliance Of The Access Control Controller And Minimize Safety Hazards. Set A Delay Circuit To Set The Unlocking Time, Which Can Input A 12V Electrical Signal To Control The Opening And Closing Of The Electric Lock. An Automatic Protection Circuit Is Installed Inside The Circuit Of The Power Supply Device. When External Lines Are Short Circuited, The Load Is Too Large, The Temperature Is Too High, Or The Voltage Is Too High, This Power Supply Device Will Automatically Cut Off The Signal Output, While The Signal Output Will Automatically Recover When The Fault Is Resolved. Product Specifications: Input Voltage: Ac 90V - Ac 260V / 50Hz Output Voltage: Dc 12V Momentary Current: 5A Persistent Current: 3.5A Unlocking Time Delay: 0 ~ 15 Seconds Poder Protection: Short Circuit/Overload/Over Current Over Voltage Protection Poder: 50W Operating Temperature: -20?~65? Size: 212*173*70Mm
Package List: 1 X Ups Access Controller Power 1 X User Manual
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the LIBO Smart Home AC90V/260V Access Control Power Supply Box?A: The dimensions are two hundred twelve millimeters by one hundred seventy-three millimeters by seventy millimeters.
Q: What material is the LIBO Smart Home Access Control Power Supply Box made of?A: The product is made of plastic, providing durability and lightweight handling.
Q: What is the input voltage range for this power supply box?A: The input voltage range is between ninety volts to two hundred sixty volts.
Q: How do I install the LIBO Smart Home Access Control Power Supply Box?A: To install, connect the input voltage to the designated terminals and wire the output to your electric lock as per the manual.
Q: Is the LIBO Smart Home Access Control Power Supply Box suitable for all types of electric locks?A: Yes, it is designed to work with various normally open and normally closed electric locks.
Q: Can I set a delay for unlocking with this power supply box?A: Yes, you can set an unlocking time delay from zero to fifteen seconds.
Q: How should I care for the LIBO Smart Home Access Control Power Supply Box?A: Keep it dry and avoid exposing it to extreme temperatures to ensure optimal performance.
Q: Does the LIBO Smart Home Access Control Power Supply Box have any safety features?A: Yes, it includes over-voltage protection, short circuit protection, and automatic shutdown features.
Q: What should I do if the power supply box is not functioning properly?A: Check for any short circuits or overloads, and ensure all connections are secure; consult the user manual for troubleshooting.
Q: Is there a warranty for the LIBO Smart Home Access Control Power Supply Box?A: Yes, the product typically comes with a warranty; please check the packaging or manual for specific details.
Q: How does the backup battery feature work with this power supply box?A: The power supply box can support an external backup battery of twelve volts and seven amp-hours for uninterrupted operation.
Q: Is this power supply box suitable for outdoor use?A: No, it is designed for indoor use only, as exposure to moisture can damage the electrical components.
Q: What is the maximum output current of the LIBO Smart Home Access Control Power Supply Box?A: The maximum output current is five amps for momentary use, and three point five amps for persistent use.
Q: Can the LIBO Smart Home Access Control Power Supply Box be used with building intercom systems?A: Yes, it is suitable for controlling various access control controllers and building intercom equipment.
Q: What type of electric locks can I use with this power supply box?A: You can use various types of electric locks that are normally open or normally closed.
Q: Does the LIBO Smart Home Access Control Power Supply Box come with a user manual?A: Yes, it includes a user manual with installation instructions and safety guidelines.