Brand Name: Lampvpath Specification: Battery Type: 3 Aa Battery Holder With Switch, 3X 1.5V Aa Battery Holder With Cover Voltage Output Of One 3 Aa Battery Holder: 4.5V, 3X 1.5V Aa Battery= 4.5 Volt Aa Battery Holder Aa Battery Holder Switch Function: On/Off Switch On 3 Aa Battery Holder Aa Battery Holder Wire Leads: 3 Aa Battery Holder With Leads, Tinned Wire End Wire Length Of 3 Aa Battery Holder : 5.7/14.5Cm Cable Diameter(Count In The Pvc Isolation Around The Wire): 0.0393/1Mm Battery Holder Cable Color: Red And Black Dimensions Of 3 Aa Battery Holder With Switch:(L*W*H)/2.681 X 1.906 X0.717/6.81Cm X 4.84Cm X 1.82M Weight Of 4.5V Battery Holder With Switch: 0.917.Oz/26G (One 3Aa Battery Holder And One Screw Weight) Box Color Of 3 Aa Battery Holder With Leads And Switch: Black Material Of 3 Aa Battery Pack With Switch: Plastic Abs Screw Size: 0.303 X 0.0787/7.7Mm X 2.0Mm(Length*Diameter) Package Contents: 4X 3 Aa Battery Holder Switch 4X Screw For Aa Battery Holder 3
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the LAMPVPATH battery holder?A: The dimensions are two point six eight one inches by one point nine zero six inches by zero point seven one seven inches.
Q: What type of material is the battery holder made from?A: The battery holder is made from durable plastic ABS.
Q: What is the voltage output of the battery holder?A: The voltage output is four point five volts, which is achieved using three one point five volt AA batteries.
Q: How do I use the LAMPVPATH battery holder?A: To use it, insert three AA batteries, connect the leads, and toggle the ON/OFF switch.
Q: Is this battery holder suitable for general use?A: Yes, this battery holder is suitable for a wide range of electronic projects requiring a four point five volt power supply.
Q: What is the wire length of the battery holder?A: The wire length is five point seven inches.
Q: How should I store the battery holder?A: Store the battery holder in a cool, dry place away from direct sunlight to maintain its integrity.
Q: Is the LAMPVPATH battery holder safe for kids?A: Yes, but adult supervision is recommended during use to prevent any accidental ingestion of small parts.
Q: How do I clean the battery holder?A: Wipe the exterior with a dry cloth; avoid using water or cleaning solutions on electronic components.
Q: Can I use this battery holder for high-drain devices?A: No, this battery holder is intended for low to moderate drain devices. Avoid using it for high-drain applications.
Q: What do I do if the battery holder does not work?A: Ensure the batteries are installed correctly and check the connections. If it still does not work, consider replacing the batteries.
Q: What is included in the package?A: The package includes four battery holders and four screws for installation.
Q: Is there a warranty for the battery holder?A: Yes, the battery holder typically comes with a manufacturer's warranty, but specifics can vary.
Q: How much does the battery holder weigh?A: The weight of the battery holder is approximately zero point nine one seven ounces.
Q: Can I use rechargeable AA batteries with this holder?A: Yes, you can use rechargeable AA batteries as long as they are compatible with the four point five volt output.