PACKAGE CONTENTS 3 x 0.96 Inch OLED Display Module (Blue) 2 x 4Pin Male Header (unsoldered) SPECIFICATIONS Screen Size: 0.96 inch Display Color: Blue Resolution: 128 x 64 Pixels Viewing Angle: > 160 Driver IC: SSD1306 Interface: I2C / IIC Operating Voltage: 3.3V 5V DC Power Consumption: 0.04W (Normal Operation), 0.08W (Full Screen Lit) I/O Ports Required: 2 (SDA, SCL) USAGE INSTRUCTIONS 1. Solder the included 4pin header to the module as required for your project (e.g., for breadboard or direct wiring). 2. Connect the module to your microcontroller: GND to Ground, VCC to 3.3V or 5V, SCL to the I2C clock pin, and SDA to the I2C data pin. 3. The default I2C address is typically 0x3C. Please verify the address with an I2C scanner script if you encounter connection issues. 4. For some microcontrollers, you may need to add 4.7kO pullup resistors on the SCL and SDA lines for stable communication. 5. Install a suitable graphics library (e.g., U8g2) in your IDE to begin programming the display. APPLICATION SCENARIOS DIY Electronics Projects: Create custom user interfaces for weather stations, system monitors, or desktop clocks. Status Indicator: Add a compact, lowpower screen to display realtime data, error messages, or operational status for your IoT devices, robotics projects, or 3D printers. Cyberdeck & Portable Computers: Integrate a small, crisp secondary screen for vital stats or command line output in custom portable computing builds. Equipment Repair: Use as a costeffective replacement display for commercial devices, such as sprinkler controllers or other equipment that use a compatible 0.96 inch I2C OLED screen.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
