This 5X8 Multi-Switch Is Specially Designed To Optimally Interface With Legacy Dish Antenna Systems. This 5X8 Multi-Switch Is Sealed So It Can Be Used Either Indoors Or Outdoors. As A Good Practice With Any Powered Devices, Allow Ventilation Of The 5X8 Multi-Switch And The Ac/Dc Module By Not Covering Them With Anything That May Prevent/Reduce Ventilation. When Used Outdoors, We Recommend Not Placing The 5X8 Multi-Switch Or The Ac/Dc Module Directly On A Hot Roof. In A Typical New Odu Installation With A 5X8 Multi-Switch Installation To An Existing Odu System Already In Place, The Total Rg-6 Cable Length From Each Ird To The Dish Antenna Should Be Kept To 150 Feet Max. The Ac/Dc Module Can Be Located Up To 100 Feet Away From The 5X8 Multi-Switch And Connects Via Rg-6/U Cable With ''F'' Connectors. In Order To Hook Up A Terrestrial Vhf/Uhf Tv Antenna Or Catv To This Multi-Switch You Will Need One Diplexer For Each Line That You Wish To Have This Capability (8 Diplexers To Hook Up All 8 Outputs). You Will Also Need To Split And Possibly Amplify The Signal Depending On How Many Lines You Want To Hook Up. We Recommend Contacting Us To Make Sure You Have The Right Equipment To Accomplish This. Can Be Used With Ku Or C Band Signals. Compatible With All Free To Air Satellite Receivers And Lnbs.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the JVI 35-TRDS8 multi-switch?A: The JVI 35-TRDS8 multi-switch measures ten inches in length, five inches in width, and zero point five one inches in height.
Q: What is the model number of this multi-switch?A: The model number of this product is thirty-five-TRDS8, identifying it as a powered multi-switch.
Q: What type of power supply does the JVI 35-TRDS8 use?A: It uses a power supply rated at one hundred seventeen volts alternating current, sixty hertz, and twenty-four volts direct current.
Q: How do I install the JVI 35-TRDS8 multi-switch?A: To install the multi-switch, connect it to the existing outdoor unit system using RG-6 cable, ensuring the total cable length does not exceed one hundred fifty feet.
Q: Can I use the JVI 35-TRDS8 for outdoor installations?A: Yes, the JVI 35-TRDS8 is designed to be used outdoors, but ensure it is not placed directly on hot surfaces.
Q: Is the JVI 35-TRDS8 suitable for commercial use?A: Yes, this multi-switch is suitable for both residential and commercial applications, including multi-dwelling units and home theaters.
Q: How do I care for the JVI 35-TRDS8 multi-switch?A: Ensure proper ventilation by not covering the multi-switch or power module and avoid placing it in direct heat to maintain its performance.
Q: What is the warranty period for the JVI 35-TRDS8?A: The warranty period for the JVI 35-TRDS8 multi-switch typically lasts for one year from the date of purchase, covering manufacturing defects.
Q: How do I connect a terrestrial antenna to the JVI 35-TRDS8?A: To connect a terrestrial VHF/UHF TV antenna, you will need one diplexer for each line you wish to connect.
Q: Is the JVI 35-TRDS8 compatible with all satellite receivers?A: Yes, the JVI 35-TRDS8 is compatible with all free-to-air satellite receivers and low-noise block converters.
Q: What should I do if my JVI 35-TRDS8 arrives damaged?A: If the multi-switch arrives damaged, contact the retailer immediately for assistance with returns or exchanges.
Q: How far can the power supply be from the multi-switch?A: The power supply can be located up to one hundred feet away from the JVI 35-TRDS8 multi-switch.
Q: Can I use the JVI 35-TRDS8 with KU band signals?A: Yes, the JVI 35-TRDS8 can be used with both KU and C band signals for satellite reception.
Q: What cable type is needed to connect the JVI 35-TRDS8?A: You will need RG-6/U cables with 'F' connectors for all connections to the JVI 35-TRDS8 multi-switch.
Q: Does the JVI 35-TRDS8 require any additional equipment for installation?A: Yes, depending on your setup, you may need additional diplexers, splitters, or signal amplifiers for optimal performance.