iDatalink Maestro Plug and Play Installation T-Harness for Select Idatalink Maestro Ready Car Radios (ADS-MRR, ADS-MRR2 or ADS-MSR module required) The iDatalink adapter lets you connect select radios to compatible iDatalink T-harnesses. This extra harness takes the place of the harness that comes with your new stereo. It connects directly between select radios and the latest Maestro Head-unit ready T-harnesses so you wont have to splice any wires. Note: This harness will not work by itself. You must also have an iDatalink interface module (ADS-MRR, ADS-MRR2, or ADS-MSR) and a compatible vehicle-specific iDatalink T-harness. iDatalink Maestro to Head Unit Adapter: This iDatalink Maestro ACC-HU series adapter harness allows for direct connection between select aftermarket radios and compatible iDatalink Maestro vehicle specific harnesses used with the iDatalink Maestro ADS-MRR, ADS-MRR2, or ADS-MSR radio replacement interface module. This adapter harness will replace the wiring harness that comes with your radio. There is a connector on one end that plugs into the back of your radio and a multi-pin iDatalink Maestro connector on the other end that will plug into a compatible iDatalink Maestro vehicle specific harness. The multi-pin connector features the following wiring pinout. Product highlights: connects to select head units also requires an iDatalink Maestro RR, RR2, or SR module and compatible iDatalink vehicle-specific T-harness Idatalink Maestro Installation T-Harness for Select Car Radios iDatalink Maestro to Head Unit Adapter: The iDatalink adapter harness allows for direct connection between select aftermarket radios and compatible iDatalink Maestro vehicle specific harnesses used with the iDatalink Maestro ADS-MRR, ADS-MRR2 or ADS-MSR radio replacement interface module. The adapter harness will replace the wiring harness that comes with your radio. The iDatalink Maestro adapter allows you to connect select radios to compatible iDatalink T-harnesses. This extra harness takes the place of the harness that comes with your new stereo. It connects directly between select radios and the latest Maestro Head-unit ready HRN-HRR T-harnesses so you wont have to splice any wires. This Radio Adapter Requires: iDatalink Maestro ADS-MRR or MRR2 module and its compatible HRN-HRR series vehicle-specific T-harness iDatalink Maestro ADS-MSR module and its compatible HRN-SR series vehicle-specific T-harness. Note: This harness will not work by itself. You must also have an Idatalink Maestro Interface Module (ADS-MRR, ADS-MRR2 or ADS-MSR) and a Compatible Vehicle-Specific T-Harness. The ADS-MRR or ADS-MRR2 will require the HRN-HRR series T-harness for . (It MUST be the Head Unit Ready HRN-HRR version, NOT the HRN-RR one.) The ADS-MSR will require the HRN-SR Series T-harness. Sold separately. Idatalink Maestero Radio Replacement Interface Modules: ADS-MRR: (Vehicle Coverage: 30 Makes - Models: 4318 - Years: 2002+) ADS-MRR2: (Vehicle Coverage: 30 Makes - Models: 4582 - Years: 2002+) with 3 Programmable Outputs ADS-MSR: (Vehicle Coverage: 12 Makes - Models: 725 - Years: 2002+)
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
