We will send you an email to reset your password.
Vendor: Electroeshop
Type:
Sku: 200007763:201336100;3:201010228
Availability: In Stock
Couldn't load pickup availability
Sold by Electroeshop, an authorized reseller.
Returns accepted within 30 days | support@electroeshop.com
Returns accepted within 30 days of delivery.
Damaged or Defective Item
Free return shipping + replacement or full refund
Wrong Item Received
Free return shipping + replacement or full refund
Change of Mind
Return shipping at customer's expense · 25% restocking fee applies
Brand Name: SNVI
Choice: yes
Condition: New
High-concerned chemical: none
Origin: Mainland China
Type: Module
semi_Choice: yes

This is an introduction to the MMA8451 module and the MMA8452 module. The MMA8451 has a 14 - bit
resolution, and the MMA8452 has a 12 - bit resolution. They are intelligent, low - power, three - axis,
capacitive micro - mechanical acceleration sensors. These acceleration sensors have rich embedded functions
and flexible user - programmable options, and can be configured with up to two interrupt pins. The
MA8452Q has user - selectable measurement ranges of ±2g/±4g/±8g, and can output high - pass filtered
data and non - filtered data in real time. The device can be configured to use any combination of configurable
embedded functions to generate inertial wake - up interrupt signals, which enables the MA8452Q to maintain
a low - power mode in a stationary state while monitoring events.
This is the product parameter table of a module. Its power supply is 3 - 5V (and the communication is fully
compatible with 5V working systems). The module size is 14.5mm * 20.5mm. The diameter of the mounting
hole is 3mm, and the hole spacing is 15mm. There is no specific brand name or other distinct entity information
mentioned.
This text presents the product characteristics of a sensor. It has a supply voltage of 1.95 V to 3.6 V and an interface
voltage of 1.6 V to 3.6 V. It offers optional dynamic measurement ranges of ±2g/±4g/±8g, with an output data rate
(ODR) ranging from 1.56 HZ to 800 HZ and a noise level of 99μg/√HZ. It provides 12 - bit and 8 - bit digital outputs,
and an I2C digital output interface that can reach a high frequency of 2.25MHZ when the pull - up resistor is 4.7KΩ.
There are 2 programmable interrupt pins suitable for 6 interrupt sources, 3 embedded channels for motion
detection, 1 channel each for free - fall or motion detection, pulse detection, and shake detection. It supports
direction (horizontal/vertical) detection with set hysteresis compensation, automatic change of ODR for automatic
wake - up and sleep, real - time output of high - pass filtered data, and power consumption ranging from 6μA to
165μA. There is no specific brand name or other distinct entity information mentioned.

⚠️ WARNING (California Proposition 65):
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information, please visit www.P65Warnings.ca.gov.