Gizmo DorksWe provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool.Wood is a new FDM filament that was developed to print wooden-like objects. The filament contains recycled wood with PLA and some binding polymers. The printed wood will appear rough and similar to Medium Density Fiberboard, known as MDF. Wood filament is less viscous compared to PLA or ABS during printing. Please add a little extra extrusion to the beginning of the print to help prevent dry extrusion. Also, increasing the retraction setting during slicing will reduce leakage. The wood filament will appear delicate after print, so please allow the wood filament to set approximately thirty to sixty minutes after printing.Extrusion Temperature: 220 - 230 CHeated Bed: 110 - 120 CLayer Height: .2-.25 mmDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
