Need To Know Before Buying Before You Begin The Installation Of Your New Remote Control, Make Sure The Fan Is Set To The Highest Speed. Note: This Remote System Is Compatible With Most Ceiling Fans Except Those That Have Built In Remote System. No Light Dimming, No Reverse. Note: This Remote System Is Not Designed For Fan Forward/Reverse Function, For Fan Reverse Function, Stop The Fan First, And Then Manually Change The Position Of Reverse Switch Located On The Fan Body. Trouble Shooting Guide 1. Fails To Operate A. Power To Receiver ? B. Receiver Wired Correctly ? C. Fan Manual Speed Control In Highest Position D. Light Kit Switch Turned On ? E. Good Battery In The Transmitter ? F. Code Set At Exact Same Positions In Both Transmitter And Receiver ? 2. Won'T Operate At Distance If Transmitter Operates Fan/Light Kit When Up Close, But Not At 20 Feet Away. Try Placing The Brown Antenna Wire Higher, Up Through Ceiling/Outside The Junction Box. Package Included: 1 X Remote(Transmitter) 1 X Receiver 6 X Plastic Wire Connector 2 X Screws 1 X Manual Notice ! Your Ceiling Fan And Light Kit Assembly Must Meet The Following Requirements: 1. Do Not Use With Solid State Fans. 2. Electrical Rating: 120V 60Hz 3.5A Max. Motor Amps: 1.0 Max. Light Watts: 240
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the FAN-9T remote control kit?A: The dimensions of the FAN-9T remote control kit are five point six seven inches in length, two point seven six inches in width, and one point one eight inches in height.
Q: What materials is the FAN-9T remote control made of?A: The FAN-9T remote control kit does not specify any particular materials in its product description.
Q: What is the electrical rating of the FAN-9T remote control kit?A: The FAN-9T remote control kit has an electrical rating of one hundred twenty volts, sixty hertz, and three point five amps.
Q: How do I install the FAN-9T remote control kit?A: To install the FAN-9T remote control kit, ensure the fan is set to the highest speed and follow the included manual for wiring the receiver inside the ceiling fan canopy.
Q: Can I use the FAN-9T remote control with any ceiling fan?A: The FAN-9T remote control is compatible with most ceiling fans, except those with built-in remote systems.
Q: Does the FAN-9T remote control have a dimming feature?A: No, the FAN-9T remote control does not have a dimming feature for the light.
Q: How do I care for the FAN-9T remote control kit?A: To care for the FAN-9T remote control kit, ensure that the transmitter uses four AAA one point five volt batteries and replace them as needed.
Q: Is the FAN-9T remote control kit safe to use?A: Yes, the FAN-9T remote control kit is safe to use as long as it is installed correctly and used with compatible ceiling fans.
Q: How do I store the FAN-9T remote control when not in use?A: Store the FAN-9T remote control in a dry place, ideally inside its packaging, to protect it from dust and damage.
Q: What should I do if the FAN-9T remote does not operate?A: If the FAN-9T remote control does not operate, check for power to the receiver, ensure it is wired correctly, and verify that the fan speed control is set to the highest position.
Q: Can I operate the FAN-9T remote control from a distance?A: Yes, the FAN-9T remote control can operate from a distance, but if it fails to do so, try raising the brown antenna wire for better reception.
Q: Does the FAN-9T remote control kit include a manual?A: Yes, the FAN-9T remote control kit includes one user manual to guide installation and usage.
Q: What is the maximum wattage for lights when using the FAN-9T remote?A: The maximum wattage for lights when using the FAN-9T remote control kit is two hundred forty watts.
Q: Is the FAN-9T remote suitable for beginners?A: Yes, the FAN-9T remote control kit is suitable for beginners, as it comes with clear installation instructions.
Q: What if my FAN-9T remote control arrives damaged?A: If your FAN-9T remote control arrives damaged, contact the seller for a return or replacement, following their return policy.