Kit Includes: Cleaner Spray + Microfiber Towel + Precision Tip
Material Safety: Safe on PBT, PA66, Rubber Seals, Copper/Gold Pins
Origin: Mainland China
Product: Automotive & EV Electrical Contact Cleaner
Safety Rating: High Dielectric Strength, Non-Conductive, Zero Residue
Type: Clearing Kits
Key Features & Benefits
Restores Low-Resistance EV Charging: Flushes oxidation, dried mud, and grime off charging gun terminals and vehicle inlets to eliminate overheating alarms and charge interrupts.
High Dielectric Safety (Non-Conductive): High electrical resistance prevents short circuits, arcing, or current leakage across sensitive EV pins and high-voltage connections.
Flash-Evaporating Zero-Residue Finish: Dries rapidly within seconds without leaving oily films, moisture traces, or conductive residue behind.
100% Safe on Automotive Plastics & Seals: Formulated to protect delicate connector housings, PBT/PA66 engineering plastics, and internal waterproof silicone gaskets.
Complete Precision Cleaning Kit: Includes a narrow needle-tip dispenser for targeted pin flushing and a lint-free microfiber towel to wipe away dissolved grime.
Wide Application
EV Charging Infrastructure: Type 2 (Mennekes) plugs, CCS combo connectors, home wallbox nozzles, and public charging gun pins.
Vehicle High-Voltage Ports: On-board charging (OBC) ports, 12V auxiliary battery posts, and high-voltage battery disconnect plugs.
Engine & Transmission Sensors: Mass airflow (MAF) sensors, throttle position sensors, oxygen sensor harnesses, and ECU multi-pin plugs.
Cockpit & Diagnostic Electronics: OBD2 diagnostic ports, steering column stalks, fuse boxes, and infotainment harness connectors.
How to Use
Step 1: Power Down the System 🔌
Ensure the vehicle is powered off and the charging cable is completely disconnected from both the car and the power station.
Step 2: Spray into Terminals 🚿
Aim the spray nozzle or precision tip directly into the charging port sockets or electrical pins from a distance of 5–10 cm to flush out loose dust and oxidation.
Step 3: Wipe Off Dissolved Grime 🧽
Use the included blue microfiber cloth to wipe around the port housing and absorb dislodged residues.
Step 4: Allow Complete Flash Evaporation ⏱️
Wait 60–90 seconds to allow all solvent to evaporate fully before reconnecting any charging cables or switching on power.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
