The replacement battery is for Nintendo Switch games console. Model: HAC-003, 3.7V 4310mAh 16.0Wh. Compatible with Switch modeled HAC-001 and HAC-001(-01). A customized battery shovel (tape cutter) and teardown screwdriver repair tool kit included. The upper shock-absorbing sponge cushion and bottom double-sided adhesive tape are pre-applied.Identify the Battery Problem:1. The internal battery needs to be replaced when the charging process finished in fewer hours than before. And the gaming hours gradually shorten even if it was fully charged2. Replacing the battery wont fix a Switch that doesnt charge, doesnt power on, or drains the energy while not in use.Note on DIY steps:1. Make sure the old battery is the problem. Try the new battery before you start to dismantle the old one.2.The most difficult step is to separate the battery from the middle frame. Use the special tape cutter, force it into the seam, little by little the battery can be shoveled up.Specifications:Model: ?HAC-003.Version: C2.Part Num. : HAC-A-BPHAT-C2Compatible Console: Nintendo Switch HAC-001 and HAC-001(-01).Interchangeable Part Num. : HAC-A-BPHAT-C0/C2, HAC-S-JP/EU-C0Battery type: rechargeable lithium ion.Standard voltage: 3.7 V.Capacity: 4310 mAh, 16.0 Wh.Weight: 75 g.Dimensions: 75 x 71 x 6.3 mm.Packaging:1 x N-Switch Battery Pack (HAC-003).1 x customised stainless steel shovel.1 x Y00 Tri-wing screwdriver.1 x PH000 screwdriver.1 x plastic opening pry tool.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
