Important Note: 1.Two Displays Cannot Display Simultaneously. 2.You Need To Use A Standard Dp1.4 Cable To Connect This Switch To Work Properly, Otherwise It Will Flicker Or The Screen Will Turn Black. 3. If The Screen Flickers, It Is Because The Dp Cable Is Too Long Or Of Poor Quality. Please Replace It With A Better Or Shorter Dp Cable. This Product Does Not Have A Signal Amplification Function, And An 8K Signal Requires A Larger Bandwidth. If The Dp Line Is Too Long Or The Quality Is Too Poor, The Signal Attenuation Will Be Severe, So The Screen Will Flicker Or Go Black. 4.Due To System Limitations, There May Be Compatibility Issues Between The Hp Zr30W And Some Graphics Cards. Please Do Not Connect The Hp Zr30W Monitor. 5. Do Not Use Too Long Cable(Total 3M) For Connection Between The Switcher And Your Devices. 6. Because Computer Signals Need To Be Communicated With The Product Before Being Transmitted To The Monitor, There Will Be A Delay Of Several Seconds After Being Connected, And The Delay Time Will Also Vary For Different Monitors. It Is A Normal Phenomenon.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the 8K Bi-Directional DisplayPort Switch?A: The dimensions are seven point two centimeters by five centimeters by one point five centimeters.
Q: What is the maximum resolution supported by this DP switcher?A: This switcher supports up to eight thousand pixels at sixty hertz.
Q: What type of cable do I need for optimal performance?A: You need a standard DisplayPort one point four cable that is no longer than three meters.
Q: How do I switch between the two displays?A: To switch, simply press the 'Select' button on the device.
Q: Can I use this switcher with two monitors at the same time?A: No, two monitors cannot display simultaneously; you must switch between them.
Q: Is this switch compatible with all graphics cards?A: No, there may be compatibility issues with certain graphics cards, especially with the HP ZR30W monitor.
Q: How do I connect the DisplayPort switch?A: Connect the DisplayPort cable from your computer to the input and connect the outputs to your monitors.
Q: Is there a delay when switching displays?A: Yes, there may be a delay of several seconds after connection before the display shows the signal.
Q: What should I do if my screen flickers?A: If the screen flickers, try using a higher quality or shorter DisplayPort cable.
Q: How do I clean the DisplayPort switch?A: To clean, use a soft, dry cloth; avoid using any liquid or abrasive cleaners.
Q: Is the DisplayPort switcher portable?A: Yes, its compact design makes it very portable and easy to transport.
Q: What is the warranty on this product?A: The product typically comes with a one-year warranty covering manufacturing defects.
Q: Can I return the switch if it doesn't work?A: Yes, you can return it within the return window if it arrives damaged or defective.
Q: Does this switch require external power?A: No, this DisplayPort switch does not require external power; it operates solely through the connected devices.
Q: Is this switch suitable for gaming?A: Yes, it supports four thousand pixels at one hundred forty-four hertz, making it great for gaming.