A. Test The Environmental Conditions B. Unless Otherwise Specified, The Tests In This Specification Shall Be Conducted Under The Standard Atmospheric Conditions Tested C. Temperature:15?~35?. D. Relative Humidity: 45%~75% E. The Instrument Accuracy Of The Measured Voltage Shall Not Be Less Than 0.5 Level, And The Internal Resistance Shall Not Be Less Than 10 Ko / V. F. The Instrument Accuracy Of Measuring Current Shall Not Be Less Than The 0.5 Level G. The Accuracy Of The Instrument Used For Measuring The Temperature Shall Not Be Less Than 1? Input Range:20-72V Rated Input Voltage:24V/36V/48V/60V/72V Transfer Efficiency:95% Incoming Line:15-16Cm(R+ B-) Output Voltage:12V Output:10A Max Maximumoutput:120W Max No-Load Adjustment Rate:2% Load Regulation:3% Quiescent Dissipation:=30Ma Do Not Use It Near A Heat Source (Such As A Fire Or A Heater) Do Not Connect The Input Line To 220V Electricity Do Not Put The Product Into The Fire Or Heat It Do Not Short-Circuit The Positive Or Negative Poles Of The Product With Wires Or Other Metal Objects Non-Professional Personnel Are Prohibited To Disassemble And Repair By Themselves
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What is the input voltage range for the DC/DC converter?A: The input voltage range is twenty to seventy-two volts. This allows compatibility with various power sources, including automotive and industrial applications.
Q: What is the output power capacity of this converter?A: The output power capacity is one hundred twenty watts maximum. It can deliver a fixed output voltage of twelve volts and an output current of ten amps.
Q: What are the dimensions of the DC/DC converter?A: The dimensions are two point ninety-one inches in length, two point ninety-one inches in width, and one point twenty-six inches in height. Its compact size makes it suitable for various installations.
Q: How do I install the DC/DC converter?A: To install the converter, ensure the input wires are properly insulated and connected. Insert the insulated wire approximately zero point four inches into the plug for secure installation.
Q: Is the DC/DC converter suitable for outdoor use?A: Yes, it is waterproof with an IP67 rating. This makes it ideal for outdoor applications such as automotive and marine use.
Q: Can this converter be used with solar panels?A: Yes, it can be used with solar panels as part of a photovoltaic system. It is suitable for converting various input voltages from solar sources to twelve volts.
Q: How do I maintain the DC/DC converter?A: To maintain the converter, keep it clean and dry, ensuring no moisture enters the housing. Avoid exposing it to extreme heat sources to prevent damage.
Q: What precautions should I take while using this converter?A: Do not connect the input line to two hundred twenty volts electricity. Ensure the load does not exceed the specified maximum to prevent damage.
Q: What should I do if the converter gets damaged?A: If the converter is damaged, do not attempt to repair it yourself. Contact customer support for guidance on warranty claims or replacement options.
Q: What type of protection features does this converter have?A: The converter is equipped with intelligent protection features, including overcurrent, overload, low load, short circuit, and overheat protection.
Q: Is there a warranty for the DC/DC converter?A: Yes, there is a warranty provided by the manufacturer. Check the product documentation for specific warranty terms and conditions.
Q: Can I use this converter for LED lighting?A: Yes, this converter is suitable for powering LED lights. It can effectively convert various input voltages to the required twelve volts for LED applications.
Q: What is the efficiency rating of this converter?A: The transfer efficiency of the converter is ninety-five percent. This ensures minimal energy loss during voltage conversion.
Q: Is this product safe for non-professional use?A: No, it is recommended that non-professional personnel do not disassemble or repair the converter themselves. Professional installation is advised for safety.
Q: Can this converter handle high-temperature environments?A: No, it should not be used near heat sources such as fires or heaters. Exposure to high temperatures can damage the converter.