Quick Overview Turn Almost Anything With A Flat Surface Into A Speaker. The Dayton Audio Daex32Qmb-4 4 Ohm 40 Watt Sound Exciter Improves Power Handling With A Vented Voice Coil. Product Highlights Large 32 Mm Voice Coil Improves Power Handling To 40 Watts Rms Rare-Earth Neodymium Motor And A Proprietary Vented Voice Coil Four Arms Provide Extra Support Improving Linearity Turns Any Flat, Rigid Surface Into A Speaker Product Manuals / Spec Sheets / Downloads Dayton Audio Daex32Qmb-4 Specification Sheet Addthis Sharing Buttons Share To Facebookfacebook Share To Twittertwitter Share To Moreaddthis 1 Product Description Dayton Audios Daex32Qmb-4 Quad Arm Exciter Is Built With Four Arms That Extend Out From The Main Exciter Body, Which Allows This Exciter To Transfer Sound To A Much Larger Surface For Lower Frequency Response Extension (More B). Also, The Arms Help To Support The Magnet/Voice Coil Improving Linearity When Mounted On Horizontal Surfaces. A Neodymium Magnet Is Employed To Create Maximum Magnetic Flux Around The Proprietary Voice Coil For Increased Sensitivity When Compared To Similar Sized Exciters. In Turn, This Reduces Power Requirements And Makes It Possible To Use Very Small Audio Amplifiers, Without Sacrificing Total Output. The 1.25 Voice Coil Allows For More Input Power, Creating Rich, Dynamic Sound. To Ensure Maximum Acoustic Energy Transfer Between The Transducer And The Surface To Which It Is Attached, 3M Vhb (Very High Bond) Adhesive Is Pre-Applied To The Main Body, And The Four Arms ... Just Peel And Stick! Note: An Exciters Frequency Response And Sensitivity Are Completely Dependent On The Exciters Designated Surface. Thinner, Smaller Materials Will Tend To Be Louder And Create A Mid/Tweeter Response. Thicker, Larger Materials (With Multiple Exciters) Will Be Slightly Quieter But Result In A More Full-Range Sound. Specifications: Power Handling: 40 Watts Rms Vcdia: 1.25 (32 Mm) Nominal Impedance: 4 Ohms Re: 3.7 Ohms Le: 0.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the Dayton Audio DAEX32QMB-4?A: The dimensions are four inches in length, one point thirteen inches in width, and four inches in height.
Q: What is the nominal impedance of the DAEX32QMB-4?A: The nominal impedance is four ohms, making it compatible with various audio systems.
Q: How much power can the DAEX32QMB-4 handle?A: It can handle up to forty watts RMS, ensuring powerful sound output.
Q: How do I install the Dayton Audio DAEX32QMB-4 exciter?A: To install, simply peel off the pre-applied adhesive and stick it onto a flat, rigid surface.
Q: Is the DAEX32QMB-4 suitable for all surface types?A: No, it works best on flat, rigid surfaces to optimize sound performance.
Q: Can I use the DAEX32QMB-4 with a small amplifier?A: Yes, it is designed to work efficiently with small audio amplifiers due to its sensitivity.
Q: How do I maintain the Dayton Audio DAEX32QMB-4?A: Keep it clean by gently wiping it with a dry cloth; avoid using liquids that could damage the adhesive.
Q: Is the DAEX32QMB-4 safe for outdoor use?A: No, it is recommended for indoor use only to protect the exciter from environmental damage.
Q: What type of adhesive is used on the DAEX32QMB-4?A: It uses 3M VHB adhesive, which provides a strong bond for optimal sound transfer.
Q: Can I remove the DAEX32QMB-4 once installed?A: Removal may damage the surface it's attached to, so it's best to choose the location carefully.
Q: How does the DAEX32QMB-4 affect sound quality?A: It significantly enhances sound quality by turning any flat surface into a speaker, improving low-frequency response.
Q: Is the DAEX32QMB-4 suitable for beginners?A: Yes, it is user-friendly and requires no complex setup, making it ideal for beginners.
Q: What is the warranty on the Dayton Audio DAEX32QMB-4?A: The product typically comes with a manufacturer warranty; check with the retailer for specific terms.
Q: What should I do if the DAEX32QMB-4 arrives damaged?A: Contact the retailer immediately for assistance with returns or exchanges.
Q: How does the DAEX32QMB-4 compare to traditional speakers?A: It provides a unique sound experience by utilizing flat surfaces, unlike traditional speakers that need specific placements.
