?Type-C Interface Pd Fast Charging?The Type C Port At The Bottom Supports Pd Fast Charging,Which Can Prevent Your Carplay / Android Auto Phone Being Out Of Charge.The Maximum Charging Speed Can Reach 27W. ?The Carplay Kit Fits For Mazda? This Type-C Mazda Apple Car Play Retrofit Kit Fits For Mazda Cx3 2016 - 2019 ; Mazda Cx5 2015 - 2020 ; Mazda Cx9 2016 - 2020 ; Mazda 2 2016 -2019 ; Mazda 3 2014 - 2018 ; Mazda 6 2016 - 2020 ; Mazda Mx-5 Miata Club / Grand Touring 2016 - 2020 ; Mazda Mx-5 Miata Rf Sport 2018 - 2019 ; Mazda Mx-5 Miata Sport 2018 - 2020 (If Your Car Does Not Have An Mzd Connection Device, It Will Not Work) ; Replace Part Number: Tk78-66-9U0C K1414 00008Fz34 ?New Upgraded Wired Carplay & Android Auto?Our New Upgraded Mazda Carplay Kit Supports All Functions Of The Original Car System.It Supports Support Voice Control And Hand-Free Calling, Original Mazda Sd Card Navigation Map,Original Car Knob Control,Steering Wheel Operation,Camera & Parking Sensors And More Original Function. You Also Can Switch Freely Between The Original Car System And The Android Auto / Carplay System.?Os Version Upgrade?This Carplay Kit Can Work With The Version 70.00.021 Or Higher,But If The Car Is In Turbulence Causing Frequent Disconnection Of The Connected Mazda Carplay, It Is Due To Internal Instability Of Mazda System. Please Update Your Os Version To Above 74.00.021 N An/ F An , After Testing , This Version Will Be More Stable.?Attention?1.Please Make Sure Your System Must Be On Version 70.00.021 Or Higher, If Not, Pls Contact Us To Help You Upgrade The Firmware. 2. Siri Must Be Turned On To Connect To Carplay 3.Before Upgrading The Firmware, You Should Remove The Sd Card And Insert It When You Complete It In Case The Navigation Cannot Work.?Warranty? One-Year Warranty, Friendly Return Policy And Customer Service. Any Questions With The Mazda Carplay Kit, Please Feel Free To Contact Us, We Will Reply To You Within 12 Hours.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the Dasbecan Mazda Carplay Retrofit Kit?A: The dimensions are four inches in length, four and a half inches in width, and eight inches in height.
Q: What type of charging does this kit support?A: This kit supports PD fast charging with a maximum speed of twenty-seven watts.
Q: Which Mazda models are compatible with this Carplay kit?A: This kit is compatible with Mazda CX3 from 2016 to 2019, CX5 from 2015 to 2020, CX9 from 2016 to 2020, and several others.
Q: How do I install the Dasbecan Carplay Retrofit Kit?A: To install, connect the kit to your vehicle's MZD Connect system and ensure your car is on the required software version.
Q: Can I use this kit with my Mazda if it doesn't have MZD connection?A: No, this kit will not work if your car does not have an MZD connection device.
Q: Does this kit allow voice control and hands-free calling?A: Yes, the Carplay kit supports voice control and hands-free calling functions.
Q: How should I care for the Carplay kit to keep it in good condition?A: Keep the kit away from moisture and clean it with a soft, dry cloth to maintain its functionality.
Q: Is there a warranty for the Dasbecan Carplay Retrofit Kit?A: Yes, there is a one-year warranty included with the Carplay kit.
Q: How do I update the firmware on the Carplay kit?A: To update the firmware, connect to a computer and follow the instructions provided by Dasbecan for the update process.
Q: What do I do if the Carplay kit doesn't work after installation?A: Ensure your system is on version seventy point zero zero zero two one or higher. If issues persist, contact customer support.
Q: Can I switch between the original car system and Carplay?A: Yes, you can switch freely between the original car system and the Android Auto or Carplay system.
Q: What should I do if my Mazda Carplay keeps disconnecting?A: Make sure your car's OS version is updated to seventy-four point zero zero zero two one or higher for better stability.
Q: Is Siri required for using the Carplay functionality?A: Yes, Siri must be turned on to connect to Carplay.
Q: What if I need to return the Carplay kit?A: Dasbecan offers a friendly return policy; contact customer service for assistance with returns.
Q: Does the kit support navigation maps?A: Yes, it supports the original Mazda SD Card Navigation map.
Q: Will the Carplay kit fit my Mazda MX-5 Miata?A: Yes, the kit is compatible with Mazda MX-5 Miata models from 2016 to 2020.