The Crux Dkgm-49 Is A Premium Interface For Select General Motors Lan 29-Bit Vehicles. It Facilitates The Integration Of An After-Market Radio To Fully Retain Factory Features In Gm Lan 29-Bit Vehicles With Bose Amplified And Non-Amplified Systems. It Also Includes A Double-Din Dash Kit Replacement. This Enhanced Interface Is Also Pre-Programmed For Retention Of Steering Wheel Controls.Instalation:Before Installation:1. Locate The Main Trim.2. Locate The Left And Right Mounting Brackets.3. Slide The Appropriate Mounting Bracket Into The Trim Ring, Aligning The Holes In The Trim Ring To The Clips On The Bracket.4.For Two Single Din Radio Installation, Slide The Stacked Iso Din Unit Into The Trim Ring Bracket Assembly And Secure The Unit To The Kit Using The Screws Supplied With The Radio.Dip Switch Settings:3.5Mm Swc Cableuse The Proper 3.5 To 4 Pin Swc Cable For The Aftermarket Radio Being Used:Option A Is Used For Alpine, Clarion, (Jvc And Kenwood Units Will Use The Blue/Yellow Wire).Option B Is Used For Atoto, Boss, Dual, Fahrenheit, Jensen, Power Acoustik, Pioneer, Sony, Sound Stream And Most Off-Brand Headunits.Note: Cap Or Insulate The 3.5Mm Plug Or Blue/Yellow Wire If Not Being Used.Setting The Audio System:If The Vehicle Is Equipped With A Bose System, The Dkgm-49 Module Has A Built-In Bose Adaptor That Allows The Proper Audio Input Gain From The Aftermarket Radio To The Bose Amplifier. To Use This Feature, Plug In The Male 8-Pin Connector On The Harness To The Gray Female 8-Pin Connector On The Dkgm-49 Module. The Module Is Also Labeled Bose And Non Bose To Avoid Confusion. (See Picture Below) If The Vehicle Is Not Equipped With A Bose System, Plug In The Male 8-Pin Connector To The Black Female 8-Pin On The Gm-49 Module.Chime Volume Adjustment:The Dkgm-49 Module Has A Potentiometer To Adjust The Chime Volume. It Is Set At Halfway By Default. To Adjust The Volume, Simply Use A Suitable Screwdriver And Turn The Potentiometer Clockwise To Increase The Volume And Counter-Clockwise To Decrease The Volume.Back-Up Camera Connection1. Connect The Bad Up Camera 16-Pin Connector To The Vehicles 16-Pinfactory Connector.2 Connect The Yelow Video Rca To The New Aftemarket Radio Reverse Camera Input3. Test The Video Feed Before Installing The Radio Backinto The Dashboard. (Radio May Need To Be Set Prior To Testing) .Back Up Camera Connectionyou Can Retain Use Of The Factory Backup Camera By Using The Crux2543 Harness Provided In The Kit. See Below For Connection Instructions. (Note: Loose Wires May Not Be Needed In The Installation.)
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What vehicles is the CRUX DKGM-49 compatible with?A: The CRUX DKGM-49 is designed for select General Motors LAN twenty-nine bit vehicles. This includes models equipped with Bose amplified and non-amplified systems.
Q: What are the dimensions of the CRUX DKGM-49 kit?A: The dimensions of the CRUX DKGM-49 kit are one inch in length, width, and height. This compact size ensures a seamless fit in your vehicle's dashboard.
Q: Does the CRUX DKGM-49 kit come with a dash kit?A: Yes, the CRUX DKGM-49 kit includes a double-DIN dash kit replacement. This allows for easy installation of an aftermarket radio.
Q: How do I install the CRUX DKGM-49 kit?A: To install the CRUX DKGM-49, locate the main trim, attach the mounting brackets, and secure the aftermarket radio to the kit. Follow the detailed installation guide included in the package.
Q: Can I retain my steering wheel controls with the CRUX DKGM-49?A: Yes, the CRUX DKGM-49 is pre-programmed to retain factory steering wheel controls. This feature enhances convenience while driving.
Q: Is the CRUX DKGM-49 easy to install for beginners?A: Yes, the installation process is straightforward and can be done by beginners. Ensure to follow the step-by-step instructions provided in the manual.
Q: How do I adjust the chime volume on the CRUX DKGM-49?A: You can adjust the chime volume using a potentiometer located on the module. Turn it clockwise to increase the volume and counter-clockwise to decrease it.
Q: Can I use my factory backup camera with the CRUX DKGM-49?A: Yes, you can retain the factory backup camera using the included CRUX2543 harness. Follow the connection instructions in the manual for proper setup.
Q: What audio systems are compatible with the CRUX DKGM-49?A: The CRUX DKGM-49 is compatible with various audio systems, including Bose and non-Bose systems. It's important to connect the appropriate harness based on your audio system.
Q: Is the CRUX DKGM-49 compatible with diesel-powered vans?A: No, the CRUX DKGM-49 is not compatible with Express and Savana vans powered by a diesel engine. Ensure to check your vehicle specifications before purchasing.
Q: What features does the CRUX DKGM-49 support?A: The CRUX DKGM-49 supports features like factory steering wheel control retention, backup sensor functionality, and chime retention. It enhances your aftermarket radio experience.
Q: Does the CRUX DKGM-49 support rear entertainment systems?A: Yes, the CRUX DKGM-49 supports rear entertainment systems but requires a special order harness, the CJA2333A, which is sold separately.
Q: What is the warranty on the CRUX DKGM-49?A: The warranty details for the CRUX DKGM-49 may vary by retailer. It's advisable to check with the seller for specific warranty information.
Q: What if my CRUX DKGM-49 arrives damaged?A: If your CRUX DKGM-49 arrives damaged, contact the retailer immediately for a return or exchange. Ensure to keep the original packaging for the return process.
Q: How do I ensure proper audio input gain with the Bose system?A: To ensure proper audio input gain, connect the male eight-pin connector on the harness to the gray female eight-pin connector on the DKGM-49 module.
