Sparkle may clog 0.4mm nozzles over time, 0.6mm recommended.
Works fine with hardened aftermarket nozzles.
Central 3D Printing's line of ABS+, designed to give you nearly all of the heat resistance and properties of ABS while printing nearly as easy as PETG. Bambu AMS Compatible (Tested ourselves).
Non-toxic, grade-A pellets are used in this filament. Manufactured to a consistent tolerance (+/- 0.02mm), you will experience consistent extrusion throughout the spool.
Arrives in a cardboard box, wound on a plastic spool, vacuum sealed with a desiccant bag.
Diameter: 1.75mm (+/- 0.02mm)
Filament Net Weight: 1KG
Spool Weight: 260g
Sparkle Spool Weight: 140g
Print Settings: (The Bambu Studio/Orcaslicer ABS default works great!)
Attribute
Value (Recommended)
Extruder Temperature
220c-260c (260c)
Heated Bed
95c-115c (105c)
Heated Bed
Required
Build Surface
PEI or Similar (Textured)
Cooling Fan
0%-100% Lower for Longer Layers
Build Volume Temperature
30c-70c (40c)
Engineering Specifications:
Attribute
Value
Density
1.06 g/cm^3
Melt Flow Index (220c/10KG)
15 g/10min
Heat Distortion Temperature (ABS+)
73c/0.45MPa
Heat Distortion Temperature (Sparkle ABS+)
85c/0.45MPa
Tensile Strength
40 MPa
Elongation at Break
30%
Flexural Strength
68 MPa
Flexural Modulus
1203 MPa
Impact Strength
42 KJ/m^2
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
