The Poe-Sw802-Din Is An Unmanaged 10-Port Power Over Ethernet Switch With A Total Of 96 Watts Of Poe Power. All Poe Ports Run At 10/100Mbps And Can Provide Up To 30W Per Port Through The Ieee 802. 3At Standard. It Also Has One Gigabit Sfp And One Gigabit Ethernet Uplink Port To Allow For Communication Without Sacrificing Any Poe Ports. Specifications: Ports: 1*1000 Base-X, 1*10/100/1000 Base-T, 8*10/100 Base-T (Poe Power Supply) Poe Power: Each Power =30W, Total =96W Poe Protocol: Ieee802. 3Af, Ieee802. 3At Switching Capabity: 7. 6G Packet Forwarding Rate: 4. 17Mpps Packet Buffer Memory: 1Mb Mac Table Size: 8K Flow Control: Enabled Humidity: 10 - 90% Power: Dc48-57V Lightning Protection: Common Mode 4Kv; Differential Mode 2Kv Operating Temperature: -22F - 149F (-30C - 65C) Weight: 1. 19Lb (540G) Dimensions (W X D X H): 5. 9In X 3. 94In X 1. 65In (150Mm X 100Mm X 42Mm)All Products Sold By Poe Depot Come With A 100% Satisfaction - We Offer A 30-Day Money-Back , As Well As A 1 Year That Covers Replacement For Free.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the BV-Tech 8 Port PoE Switch?A: The BV-Tech 8 Port PoE Switch measures five point nine inches in width, three point nine four inches in depth, and one point six five inches in height.
Q: What is the total PoE power capacity of this switch?A: The total PoE power capacity of the switch is ninety-six watts, with each port capable of delivering up to thirty watts.
Q: What types of ports does the BV-Tech switch have?A: This switch features one gigabit SFP port, one gigabit Ethernet uplink port, and eight ten/one hundred Base-T PoE ports.
Q: How do I install the BV-Tech PoE switch?A: To install the switch, you can mount it on a DIN rail, ensuring it is securely attached for optimal performance.
Q: Can this switch power IP cameras?A: Yes, this switch is designed to power IP cameras, VoIP phones, and wireless access points through its PoE ports.
Q: Is the BV-Tech switch suitable for outdoor use?A: No, this switch is designed for indoor use but supports a wide temperature range from negative thirty degrees Celsius to sixty-five degrees Celsius.
Q: How do I clean the BV-Tech PoE switch?A: To clean the switch, use a dry cloth to wipe the exterior. Avoid using any liquid cleaners to prevent damage.
Q: What is the warranty period for the BV-Tech switch?A: The BV-Tech switch comes with a one-year warranty that covers free replacement for any manufacturing defects.
Q: Is this switch easy to manage?A: Yes, the BV-Tech switch is unmanaged, meaning it requires no configuration and is easy to set up.
Q: What is the weight of the BV-Tech PoE switch?A: The weight of the BV-Tech PoE switch is one point one nine pounds, which is approximately five hundred forty grams.
Q: Can I use this switch for VoIP phones?A: Yes, this switch can power VoIP phones effectively through its PoE ports, simplifying your network setup.
Q: What is the packet forwarding rate of the switch?A: The packet forwarding rate of the BV-Tech switch is four point seventeen million packets per second.
Q: What kind of environmental conditions can this switch operate in?A: The switch can operate in humidity levels from ten percent to ninety percent and in temperatures ranging from negative twenty-two degrees Fahrenheit to one hundred forty-nine degrees Fahrenheit.
Q: Does this switch have lightning protection?A: Yes, it features common mode lightning protection of four kilovolts and differential mode protection of two kilovolts.
Q: Is the BV-Tech switch compatible with other PoE standards?A: Yes, it supports both IEEE 802.3af and IEEE 802.3at PoE standards, providing versatility for various devices.
Q: What should I do if my switch arrives damaged?A: If your switch arrives damaged, contact customer support for assistance and potential return or replacement options.