Getting Started with BeagleBone & BeagleBone BlackBeagle boards are tiny computers with all the capability of todays desktop machines, without the bulk, expense, or noise. Read the step-by-step getting started tutorial below to begin developing with your BeagleBone or BeagleBone Black in minutesThe BeagleBone Black is the low-cost, high-expansion, maker-focused, bare-bones BeagleBoard, small enough to fit in an Altoids tin. Built on a high-performance TI ARM processor, the BBONE-BLACK-4G has all the capabilities of the original Beaglebone plus additional features like HDMI output. The Element 14 BeagleBone Black brings full-featured Linux to places it has never gone before.Revision C offers expanded eMMC memory to 4GB and Debian Linux instead of the original Angstrom distributionBeaglebone Black Kernel UpdateIt is always recommended that production boards be updated to the latest image upon receipt. The Beaglebone Black board recommends the eMMC to be flashed with the latest image for the best user experience.SpecificationsProcessor ?1GHz ARM Cortex-A8 (AM335x)?3D graphics accelerator?NEON floating-point accelerator?2x PRU 32-bit microcontrollersConnectivity?USB client: power, debug and device?USB host?Ethernet?Micro-SD?Micro HDMI output?2x 46 pin headers- 2x I2C, 5x UART, I2S, SPI, CAN, 66x 3.3V GPIO, 7x ADCSoftware?4Gb Embedded MMC Flash with Debian DistributionBoard?size: 3.4 x 2.1In the box(1)BeagleBone Black board,(1)USB cable(1)card that should be read.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
