The Allparts Tremol-No Is A Patented Device That Is Attached To An Electric Guitar Equipped With A Trimolo/Vibrato Unit. If You Break A String Or Let The Bass E To D Tune, The Other Strings Will Stay Tuned. Allows Guitarists 3 Playing Options: Three In This Position Their Three-Molo Works As Normal. You Can Raise Or Lower The Pitch Of Notes With The Three-Molo. -Trimolo Off: In This Position, You Will Enjoy The Benefits Of A Hard-Tail Bridge, Where The Threesome Does Not Move At All; Without Lowering Or Raising The Tone Of A Note Through The Threesome, And The Other Strings Stay In Tune If You Break One Of Them. - Threesome Dive Mode Alone - In This Position, You Can Only Lower The Pitch Of Notes. Tremol-Not Comes In 3 Versions: Type 1 Pin (Sold On This Page) Is Designed To Work With Three-Molo Blocks That Do Not Have A Flat Base, Such As Those That Are Rounded Or Beveled (To Allow More Three-Molo Trips). The Diameter Of The 1.5 Mm Spring Hole Is Necessary To Use The Pin Type. Recommended By Tremol Not For The Following Models: Ernie Ball/Music Man Trimolos, Fender Standard 2 Screws/Pole, Fender Standard 6 Screws, G&L Three-Molo Systems (New Screw Holes Required), Godin Tremolo, Gotoh 1055, Gotoh 1088, Gotoh 1099. Gotoh 510Ft, Ibanez Fat 10, Wilkinson Vs-100C, Wilkinson Vs-100G, Wilkinson Vg-300, Wilkinson-Gotoh Vsvg, Fender Vintage Style (6 Screws), Kahler (Traditional 2500, 2710 Killer, 2720 Spyder, 2750 Steeler), Schall Model Er 370, 371, 1370, 5370, 5371, 15370, 5375, 5376, 15373, Trs, Trs-101, Abm Fulcrum 2-Large Type Of Clamp Is Designed To Work With Three-Molo Blocks That Are Thicker Than 10 Mm In Strats, Prs And Three Enhanced Fr Blocks. The 3 Small Clamp Type Is Designed To Work With Three-Molo Blocks Up To Approx. 9 Mm Thick. This Includes Almost All Trimolos Floyd Rose And Fr.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What is the size of the Allparts Tremol-No?A: The Allparts Tremol-No measures three point five four inches in length, one point seven seven inches in width, and zero point three nine inches in height.
Q: What material is the Tremol-No made from?A: The specific material composition of the Allparts Tremol-No is not provided, but it is designed for durability and functionality in electric guitars.
Q: What is the model number of the Allparts Tremol-No?A: The model number for the Allparts Tremol-No is BP-2005-010.
Q: How do I install the Tremol-No on my guitar?A: To install the Tremol-No, attach it to the tremolo block of your electric guitar, ensuring it fits securely in the spring hole.
Q: Can the Tremol-No be used with all tremolo systems?A: No, the Tremol-No is designed specifically for tremolo blocks that do not have a flat base, such as rounded or beveled blocks.
Q: What are the different modes of the Tremol-No?A: The Tremol-No offers three modes: ON, OFF, and DIVE ONLY, allowing for various playing styles.
Q: How do I keep the Tremol-No in good condition?A: To maintain the Tremol-No, ensure it is securely attached, avoid excessive force on the tremolo, and check it regularly for wear.
Q: Is the Tremol-No safe for all guitar types?A: Yes, the Tremol-No is suitable for various electric guitar models, but it is essential to verify compatibility with your specific tremolo system.
Q: What should I do if the Tremol-No arrives damaged?A: If the Tremol-No arrives damaged, contact the seller immediately for a return or replacement under their warranty policy.
Q: How does the Tremol-No benefit guitarists?A: The Tremol-No allows guitarists to maintain tuning stability even if a string breaks, offering versatile playing options.
Q: Will the Tremol-No work with Floyd Rose tremolos?A: Yes, the Tremol-No is compatible with most Floyd Rose tremolos, provided they meet the specified thickness requirements.
Q: What is the recommended thickness for tremolo blocks with Tremol-No?A: The Tremol-No is designed for tremolo blocks that are thicker than ten millimeters or up to approximately nine millimeters, depending on the clamp type.
Q: Can beginners use the Tremol-No?A: Yes, the Tremol-No is suitable for beginners as it simplifies tremolo functionality and enhances tuning stability.
Q: Does the Tremol-No require any special tools for installation?A: No, the Tremol-No can typically be installed with standard tools commonly found in guitar maintenance kits.
Q: What guitars are recommended for the Tremol-No?A: The Tremol-No is recommended for use with various models, including Ernie Ball/Music Man Trimolos and Fender Standard models.
Q: How does the Tremol-No enhance tremolo performance?A: The Tremol-No enhances performance by allowing for precise pitch control and the ability to lock strings in tune during play.
