Parameter Input: Ac110V/220V 50/60Hz Output Voltage : Dc 12V (10% Adjustable) Output Current: 1A~50A, 600W Max Efficiency Level: 85% Working Temperature: 59~131 ? ( -15~55?) Ambient Humidity: 0~85% Non-Condensation Fix Screw Hole Diameter: 2.5Mm (0.1Inch) Safety Compliance: Fcc / Ce/Ccc/ Weight: 3.5 Lb / 1600G Connection Instruction L/N: Ac Power Input ?: Ground +V: Dc Power Output + Com: Dc Power Output - +V Adj: Adjust The Output Voltage (10%) Kindly Note 1) 110V/220V Must Be Selected By Switch Before Using To Avoid Damaging. Please Set The Switch To 110V For Usa. 2) Once It Is Powered, The Fan Will Run. It Does Make A Noise And The Speed Of The Fan Is Load Based. So The Higher The Load, The Louder The Noise. 3) Professional Licensed Electrician Suggests That The Max Use Should Be No More Than 80% Of The Full Loads. We Recommend To Use This 12V 50A 600W Power Supply To Power Devices Less Than 480W. 4)For Motor Devices, The Start Current Is Much Higher That Rate Power. Please Dont Use This Smps To Power Motor Devices Higher Than 35A 420W. 5) High Voltage Inside, Do Not Remove The Cover. 6) It Comes Without Installation Instruction, Wiring Cable, On/Off Switch And Screws. Professional Installation Of Qualified Electrician Is Highly Recommended. 7) Indoor Use Only! Package Included 1 X 12V 50A 600W Switch Mode Power Supply
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What is the input voltage for the ALITOVE power supply?A: The input voltage is one hundred ten to two hundred twenty volts AC. This allows it to work with standard electrical systems in various countries.
Q: What is the maximum output power of the ALITOVE power supply?A: The maximum output power is six hundred watts. This makes it suitable for high-demand devices like LED lights and amplifiers.
Q: What are the dimensions of the ALITOVE power supply?A: The dimensions are ten point twenty-four inches in length, five point ninety-one inches in width, and two point thirty-six inches in height. This compact size allows for easy installation.
Q: How do I install the ALITOVE power supply?A: To install, connect the AC power input to the L/N terminals and the DC output to the +V and COM terminals. Ensure the voltage switch is set correctly before powering on.
Q: Is the ALITOVE power supply suitable for outdoor use?A: No, it is for indoor use only. Using it outdoors could expose it to moisture and damage the unit.
Q: Can I use the ALITOVE power supply for motors?A: No, it is not suitable for motor devices drawing more than thirty-five amps. The start current for motors can exceed the power supply's safe limits.
Q: How do I maintain the ALITOVE power supply?A: Keep it in a dry, cool place and ensure proper ventilation to avoid overheating. Regularly check for dust buildup and clean the exterior.
Q: What safety features does the ALITOVE power supply have?A: It includes over-voltage, over-current, over-temperature, and short circuit protection. These features help prevent damage to connected devices.
Q: What should I do if the ALITOVE power supply arrives damaged?A: Contact customer support immediately for assistance. Keep all packaging materials for potential return or exchange.
Q: How loud is the fan in the ALITOVE power supply?A: The fan noise level varies based on the load. Higher loads result in louder fan noise due to increased cooling requirements.
Q: Is there an installation guide included with the ALITOVE power supply?A: No, there is no installation guide included. Professional installation by a qualified electrician is recommended for safety.
Q: How much does the ALITOVE power supply weigh?A: It weighs three point five pounds or one thousand six hundred grams. This weight contributes to its sturdy build quality.
Q: Can I adjust the output voltage of the ALITOVE power supply?A: Yes, the output voltage is adjustable within a range of plus or minus ten percent. This allows for customization based on device requirements.
Q: What devices can I power with the ALITOVE power supply?A: You can power devices that draw less than fifty amps at twelve volts, such as LED lights, CCTV cameras, and audio amplifiers.
Q: Does the ALITOVE power supply come with any accessories?A: No, it does not include installation instructions, wiring cables, or screws. You will need to provide these separately.
Q: What is the warranty period for the ALITOVE power supply?A: The warranty period may vary by retailer, so it's best to check with your point of purchase for specific warranty details.