Features 1. This is 2inch LCD Display Module, 240320 Resolution, Embedded ST7789VW driver chip. 2. As a 2inch IPS display module with a resolution of 240 * 320, it uses an SPI interface for communication. The LCD has an internal controller with basic functions, which can be used to draw points, lines, circles, and rectangles, and display English, Chinese as well as pictures. 3. SPI Interface, Compatible with Raspberry Pi/with Ardui/ STM32, etc. 4. Comes with online development resources (examples for Raspberry Pi/Ardui/STM32), Please check: n9.cl/9v6h0 Specifications Operating voltage 3.3V / 5V Resolution240 320 pixels Communication Interface4wire SPI DriverST7789VW DISPLAY PANELIPS Display size30.60 40.80mm PIXEL SIZE 0.0975 0.0975mm Module size 58.0 35.0mm Hardware Description LCD & Controller The LCD supports 12bit, 16bit, and 18bit input color formats per pixel, namely RGB444, RGB565, and RGB666 three color formats, this demo uses RGB565 color format, which is also a commonly used RGB format. For most LCD controllers, the communication mode of the controller can be configured, usually with an 8080 parallel interface, threewire SPI, fourwire SPI, and other communication methods. This LCD uses a fourwire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster. Package Content 2inch LCD Module x1 PH2.0 20cm 8P x1
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
