FAQs: Why cant the filaments stick to the build bed? 1. Check the temperature setting before printing, PLA Plus filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to clean and spray glue or replace the plate with a new one to ensure an strong first layer adhesion; 3. The first layer is printed too fast, set a slower speed to give the PLA Plus enough time to bond on the platform 4. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 5. If the effect is not good, it is recommended to try printing the draft before printing. Specification: Temperature Recommended Extrusion/Nozzle Temp: 190C - 220C (374?~ 428?),Heated Bed Temp: 25C - 60C (77?~ 140?)Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 If you encounter problems with use, please feel free to contact Toksen3Ds professional customer service, we will give you professional help within 24 hours. And if you could attach pictures, it will improve the speed of our problem solving. Tips: All of our Filament are 100% Tangle-Free before Package Open, To Avoid Tangle Problem, Pls Insert the Free End of the Filament into Spool Holes after Each Time Printing Toksen3D PLA Plus 3D Printer Filaments, 1.75mm, Net Weight: 1 kg (2.2 lbs) Packaging Included:1 spool of PLA filaments
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
