Inline Duct Booster, Housing Material Galvanized Steel, Fits Duct Dia. 5 To 8 In., Voltage 115, Max. Amps 0.51, Max. Wattage 40, Number Of Speeds 1Length 7 In. Cfm At 0.000-In. Sp 275Max. Inlet Temp. 200 Degrees F, Inlet And Outlet Dia. 5 To 8 In., 60 Hz, 1 Phase Motor Rpm 1550, Motor Enclosure Totally Enclosed, Width 9-1/2 In., Height 8-3/4 In. Speed Control Yes Mounting Position Horizontal Includes Mounting Template Restrictions Note: Cfm Rating Is For 8' Dia. Pipe. Air Flow Will Decrease Slightly With Smaller Pipe. In-Line Centrifugal Fan Duct Booster Fits In Round, Square, Or Flat Ducts As Shallow As 3-1/4' Deep. One 4' X 7' Cutout Is Required. Unit Attaches To Ductwork With 4 Sheet Metal Screws. May Be Actuated By 5C968 Pressure Switch. Steel Housing And Wheel. 1/70 Hp, 1550 Rpm, 115V, 60 Hz Permanently Lubricated Motor Is Positioned Out Of The Air Stream. Ul Listed. Max. Operating Air Temp.: 200 F; Not For Use With Combustion Exhaust Motor Shaft Should Remain Horizontal To The Floor; Mount On Bottom Of Horizontal Or Side Of Vertical Duct.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What is the size of the Tjernlund DB-2 Duct Booster?A: The Tjernlund DB-2 Duct Booster is eleven and a half inches long, eleven and a half inches wide, and eleven and a half inches high. It fits duct diameters from five to eight inches.
Q: What material is the Tjernlund DB-2 made from?A: The Tjernlund DB-2 is made from galvanized steel and alloy steel. This construction ensures durability and longevity.
Q: What is the maximum airflow capacity of the Tjernlund DB-2?A: The maximum airflow capacity is two hundred seventy-five cubic feet per minute. This rating is based on an eight-inch diameter duct.
Q: How do you install the Tjernlund DB-2 Duct Booster?A: To install the Tjernlund DB-2, you need a four-inch by seven-inch cutout in your ductwork. It attaches using four sheet metal screws.
Q: Can the Tjernlund DB-2 fit into rectangular ducts?A: Yes, the Tjernlund DB-2 can fit into rectangular ducts as shallow as three and a quarter inches. It's designed for versatile installation.
Q: Is the Tjernlund DB-2 suitable for high-temperature environments?A: Yes, the Tjernlund DB-2 can operate at temperatures up to two hundred degrees Fahrenheit. This makes it ideal for heating and cooling applications.
Q: How do you clean the Tjernlund DB-2 Duct Booster?A: To clean the Tjernlund DB-2, simply wipe the exterior with a damp cloth. Ensure the unit is powered off before cleaning.
Q: What safety features does the Tjernlund DB-2 have?A: The Tjernlund DB-2 features a totally enclosed motor for safety and efficiency. It is UL listed for safe operation.
Q: What is the voltage and amperage of the Tjernlund DB-2?A: The Tjernlund DB-2 operates on one hundred fifteen volts and a maximum of zero point five one amps. This ensures compatibility with standard home electrical systems.
Q: Is the Tjernlund DB-2 easy to operate?A: Yes, the Tjernlund DB-2 has a single speed and includes a speed control feature. This makes it user-friendly and straightforward to operate.
Q: What if the Tjernlund DB-2 arrives damaged?A: If your Tjernlund DB-2 arrives damaged, contact customer support for assistance. Most retailers offer a return or exchange policy.
Q: Does the Tjernlund DB-2 come with a warranty?A: Yes, the Tjernlund DB-2 typically comes with a manufacturer's warranty. Check with the retailer for specific warranty details.
Q: Can the Tjernlund DB-2 be used in vertical ducts?A: Yes, the Tjernlund DB-2 can be mounted on the bottom of horizontal ducts or the side of vertical ducts. Its design supports both orientations.
Q: What is the power rating of the motor in the Tjernlund DB-2?A: The Tjernlund DB-2 features a one over seventy horsepower motor rated at one thousand five hundred fifty RPM. This motor provides efficient airflow.
Q: Is the Tjernlund DB-2 suitable for residential use?A: Yes, the Tjernlund DB-2 is designed for residential use, enhancing heating and cooling efficiency in home duct systems.