The Coax Tweeter Concentric To The Woofer Of The Mpx 165.3 Car Audio Coaxial Speakers Allows For One Single Linear-Phase Emission Point, For A Natural Timbre Providing A Detailed Sound Stage. Thanks To The �Center Tuning Duct� Geometry, The Tweeter Resonance Frequency Is Especially Low And The Employment Of Damping Materials For The Inside Provides For A Linear Acoustic Emission. The Acoustic Lens Optimizes Its Off-Axis Response, Which Is Typical With Door Installation Of Coax Speakers; Besides, The 36 Mm Diameter Woofer Generates Deep And Controlled Bass Frequencies.
Features - Concentric Coaxial Tweeter Built In The Woofer Voice Coil, Achieving One Single Point Of Emission, To Re-Create The Virtual Sound-Stage Like In Live Music Performances. 20 Mm Voice Coil Tetolon Fiber Soft Dome Tweeter, Featuring �Center Tuning Duct� Geometry, For Lower Resonance Frequency And Reduced Harmonic Distortion. Tweeter Support Working As A Rear Chamber, Sized For Low Fs, To Ensure A Well Damped High Pass Frequency Roll-Off, Allowing Low Cut-Off Frequency Crossover Point. 36 Mm Pure Copper Woofer Voice Coil Wound On A Polyamide Former, For Outstanding Power Handling And Dynamic Compression-Free Reproduction. Pressed-Pulp Cone With Cotton Fibers, Combining Stiffness And Lightweight For A Wide Frequency Response. Cone Profile Geometrically Refined To Perfectly Match With The Tweeter Emission Ensuring Phase Consistency In The Crossover Area. Specifications - Power Handling - Peak W: 200 Power Handling - Continuous W: 100 Impedance ?: 4 Frequency Response Hz: 45 � 21,5K Sensitivity Db Spl: 92 Woofer Size Mm (In.): 165 (6.5) Tweeter Size Mm (In.): 25 (1) Woofer Voice Coil � Mm (In.): 36 (1.42) Tweeter Voice Coil � Mm (In.): 20 (0.8)
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the Hertz Mille Pro Series MPX-1653 speakers?A: The dimensions of the Hertz Mille Pro Series MPX-1653 speakers are six point five inches in diameter and two point ninety-one inches in height.
Q: What is the power handling capacity of these speakers?A: The speakers have a peak power handling of two hundred watts and a continuous power handling of one hundred watts.
Q: What is the impedance of the Hertz Mille Pro Series MPX-1653?A: The impedance of these speakers is four ohms.
Q: What is the frequency response range of the MPX-1653 speakers?A: The frequency response range of the MPX-1653 speakers is from forty-five hertz to twenty-one point five kilohertz.
Q: How do I install the Hertz Mille Pro Series MPX-1653 speakers?A: To install the speakers, you need to mount them in your vehicle's door using suitable brackets and connect them to your audio system's wiring.
Q: Are the MPX-1653 speakers suitable for all car models?A: Yes, the MPX-1653 speakers can fit in various car models, but checking compatibility with your vehicle's dimensions is recommended.
Q: How do I care for the Hertz Mille Pro Series MPX-1653 speakers?A: To care for the speakers, avoid exposing them to moisture and clean them gently with a soft cloth to remove dust.
Q: Can I use these speakers without an amplifier?A: Yes, the MPX-1653 speakers can be used without an amplifier, but an amplifier can enhance sound quality and performance.
Q: What type of music is best suited for the Hertz Mille Pro Series MPX-1653 speakers?A: These speakers are versatile and perform exceptionally well with various music genres, including rock, pop, and jazz.
Q: What is the warranty period for the Hertz Mille Pro Series MPX-1653 speakers?A: The warranty period for the MPX-1653 speakers typically lasts for one year from the date of purchase.
Q: What should I do if my speakers arrive damaged?A: If your speakers arrive damaged, contact customer support immediately to report the issue and initiate a return or exchange.
Q: Are the MPX-1653 speakers weather resistant?A: No, the MPX-1653 speakers are not specifically weather resistant, so it's best to use them in dry environments.
Q: How do I connect these speakers to my car's audio system?A: To connect the speakers, use the appropriate wiring harness to connect the speaker terminals to your car's audio system.
Q: What materials are used in the construction of the MPX-1653 speakers?A: The MPX-1653 speakers feature a pressed-pulp cone with cotton fibers and a neodymium magnet for improved sound quality.
Q: Do the MPX-1653 speakers come with a mounting kit?A: Yes, the MPX-1653 speakers usually come with a mounting kit, including screws and brackets for easy installation.
Q: What is the sensitivity rating of the Hertz Mille Pro Series MPX-1653 speakers?A: The sensitivity rating of the MPX-1653 speakers is ninety-two decibels, indicating their efficiency in converting power to sound.