With the DIGITUS 2.5 inch SATA hard drive adapter, you can increase system speed and performance costeffectively by installing an M.2 or SATA SSD in your PC or notebook. The hard drive adapter is used like a standard 2.5 inch hard drive with SATA III connection. Due to the low installation height of only 7 mm, it can be installed in all common notebooks. M.2 (NGFF) SSD of the following type are supported: M.2 type 2230, 2242, 2260, 2280 with Bkey and B+M key. Support for M.2 PCIe NVMe SSDs with Mkey is not available. Furthermore, SATA SSD with Mini PCIe 52 pin connector are supported as a full size version. The respective builtin SSD is selected via DIP switch on the board. Boot operations are supported by the adapter for all standard operating systems such as Windows, Mac OS or Linux. The internal SSD storage is protected from dust and damage by the fully enclosed aluminium housing. The SATA III interface offers a data transfer speed of 6 Gbit/s. The reading speed can be up to 520 MB/s depending on the SSD used. The adapter supports SATA red.3.2 with DEVSLP power saving mode.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
