1) Oculink SFF8611 to GenZ 1C (EDSFF) E1.S SSD adapter, each ouclink port can connect to one SSD. The converter can be installed inside your system via the oculink interface. 2) This converter can connect two GENZ SSDs in E1.S. Suitable for 9.5mm/15mm/25mm thickness SSD with heat sink. (such as PM9A3 PM9D3 P5801X) 3) Note: Only thick EDSFF E1.S SSD is supported, thin models cannot be installed. 4) The card uses the EDSFF protocol to transmit PCI Express 5.0/4.0 signals. The data transfer rate is up to 64Gbps, (note: the hard drive and computer motherboard determine the actual speed). 5) Note: Installing 2 EDSFF E1.S SSDs on the adapter card consumes a lot of power. Please be sure to connect the SATA power supply and ensure that the machine power supply is sufficient. Insufficient power supply will cause a blue screen of death or disk drop and other failures!
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
