Features: Overcharge Release Voltage: 4.28V+/-0.05V. Overdischarge Detection Voltage: 2.9V+/-0.05V. Upper Operating Current: 8A. Upper Instantaneous Current: 16A. Static Current: Less Than 10Ua. Charge Voltage: 8.4V-9V. Size: 41X8X2.2Mm. Packing Included:2Pcs. Main Function: Overcharge Protection, Over Discharge Protection, Short Circuit Protection, Overcurrent Protection. The Described Power Range Is Applicable To The Following Products: Massager Battery Pack, Led Lamp Standby Power Supply, 12V Electronic Products, Solar Street Lamp Battery Pack, Monitoring Standby Power Supply, And Other Products. Wiring: B+ : Connect To Battery Positive. B- : Connect To Battery Negative. Mb: Connection Point Between Battery 1 And Battery 2. P+: Positive Pole For Charging/Discharging (Common At Charging/Discharging End). P- : Negative Pole For Charging/Discharging End (Common At Charging/Discharging End). Tips:&Nbsp; When Assembling The Battery Pack, The Battery Voltage, Capacity And Internal Resistance Shall Be Matched. The Battery Voltage Shall Be Appropriate At About 3.7V Of Rated Voltage. If There Is No Output After Assembling The Battery Pack, It Can Be Charged At 8.4V Voltage.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the ACEIRMC Charger PCB BMS Protection Board?A: The dimensions are forty-one millimeters by eight millimeters by two point two millimeters.
Q: What type of batteries is this protection board compatible with?A: This board is compatible with three point seven volt lithium-ion batteries, including various shapes and capacities.
Q: What is the maximum operating current for this charger?A: The maximum operating current is eight amps.
Q: How do I connect the ACEIRMC Charger PCB?A: Connect B+ to battery positive, B- to battery negative, and use P+ and P- for charging and discharging.
Q: Is the ACEIRMC Charger PCB suitable for beginners?A: Yes, it is suitable for beginners, but proper wiring according to the diagram is essential.
Q: Can I use this with a solar street lamp battery pack?A: Yes, this protection board is designed for use with solar street lamp battery packs.
Q: How do I ensure the battery pack is safe?A: Match the battery voltage, capacity, and internal resistance carefully, and avoid mixing good and poor batteries.
Q: How should I store the ACEIRMC Charger PCB?A: Store in a dry place away from extreme temperatures to ensure optimal performance.
Q: What should I do if the board arrives damaged?A: Contact customer support immediately to report the damage and inquire about return options.
Q: Does this charger offer safety protections?A: Yes, it features overcharge, over-discharge, short circuit, and overcurrent protection.
Q: What is the static current of the charger?A: The static current is less than ten microamps.
Q: How long is the effective life of this product?A: The effective life is greater than fifty thousand hours.
Q: Is the ACEIRMC Charger PCB suitable for LED backup power?A: Yes, it can be used for LED light backup power supply.
Q: Can I charge my batteries at eight point four volts?A: Yes, batteries can be charged at eight point four volts if no output is detected after assembly.
Q: What type of manufacturing brand is ACEIRMC?A: ACEIRMC is a reputable manufacturer known for high-quality battery management systems and chargers.