Ipcx-Actha1.Support Hd Camera Testing:Tvi 8Mp(3840*2156 15P), Cvi 8Mp(3840*2156 15P), Ahd 8Mp(3840*2156 15P).2.Support Ip Camera Max Up To 6K And Analog Camera.3.Support Poe 48V, Dc5V 2A, Dc12V 3A,Dc24 1A Output.4.Compatible With Onvif Standard Protocol, Compatible To Most Cameras In The Market.5.Screen Resolution: Hd Ips 1920 1200, Instant Image Transmission.6.Ip Discovery Tool, It Is Used To Scan The Whole Network Segment Ip, And Auto-Modify Testers Ip Address.7.Open Source, Can Install Android Software.8.4K H265, H264, Mpeg4 Network Camera Main Stream Test.9.Hdmi Input And Output, 1080P.10. With Built-In Manual Book And Browser.11.Support Wireless Wifi(10M/100M/1000M) And Hotpots, Easily Connect And Test Wireless Wifi Camera.12.Rs485 Port: Receive, Send And Analyze Data, Used For Ptz Protocol Analysis, Etc.13.Network Tools: To Scan All The Ip Address In The Network, And Test Current Network Condition And Ping Value.14.It Can Update Software On Line On Store.15. Network Cable Tdr Test Function Can Display Cable Length, Attenuation, Quality, Reflectivity, Impedance Parameters.16. Rechargeable 7000Ma / 7.4V Polymer Lithium Battery. Working Hour:6~10 Hours.If You Have Any Operation Issue, Please Dont Hesitate To Contact With Us.
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the IP camera tester?A: The dimensions are nine point forty-five inches in length, five point eighty-three inches in width, and one point eighty-nine inches in height.
Q: What is the screen resolution of the tester?A: The screen resolution is one thousand nine hundred twenty by one thousand two hundred pixels.
Q: What type of battery does the camera tester use?A: It uses a seven thousand milliampere-hour lithium polymer battery for power.
Q: How do I use the IP camera tester?A: Connect your camera to the tester using HDMI or power output, then navigate the interface to start testing.
Q: Is this suitable for beginners?A: Yes, the device is user-friendly and comes with a built-in manual for guidance.
Q: How do I connect to a Wi-Fi camera?A: Simply enable the wireless feature on the tester, select your Wi-Fi network, and follow the prompts to connect.
Q: How should I store the IP camera tester?A: Store it in a cool, dry place, away from direct sunlight and extreme temperatures.
Q: Can I leave the battery charging overnight?A: No, avoid overcharging to extend the lifespan of the battery.
Q: What if the device arrives damaged?A: Contact customer support immediately to initiate a return or exchange process.
Q: Is there a warranty on the IP camera tester?A: Yes, it typically comes with a one-year limited warranty covering manufacturing defects.
Q: How do I update the software on the tester?A: Connect the device to the internet and follow the on-screen instructions to perform a software update.
Q: What network tools are included with the tester?A: It includes IP discovery tools to scan networks and assess network conditions.
Q: Can I use this tester for both IP and analog cameras?A: Yes, it supports testing for both IP cameras up to six K and various analog camera formats.
Q: How long does the battery last during use?A: The battery lasts approximately six to ten hours on a full charge.
Q: Does the tester support PoE cameras?A: Yes, it supports Power over Ethernet at forty-eight volts.