From The Manufacturerfeaturing A Compact Tower Form Factor, Tripp Lite'S Smart1500Slt Smartpro Ups System Protects Connected Equipment Including Servers, Networking Equipment, Telecom Systems Against Data Loss, Downtime And Equipment Damage Due To Power Outages, Voltage Fluctuations And Transient Surges. Featuring Selectable Input Voltage And Advanced Automatic Voltage Regulation, It Provides Regulated Nominal 100, 110 Or 120 Vac Sine Wave Output Without Using Battery Power During Brownouts And Overvoltages. Large Internal Batteries Support Connected Equipment During Blackouts. Usb And Db9 Communication Ports Support Messaging Of Detailed Ups Operational Parameters And Line Power Status. Included Poweralert Ups Monitoring And Unattended Shutdown Software Provides Management Support For An Unlimited Number Of Network Ups Systems. Key Features Smart1500Slt Ups System Offers: Reliable Protection For Servers, Networking Equipment, Telecom Systems And More Advanced Line-Interactive Operation Corrects Brownouts And Overvoltages 8 Battery-Supported Ac Outlets Plus Tel/Ethernet Line Protection Included Poweralert Software For Complete Network Power Management And Control $250,000 Ultimate Lifetime Insurance; 2-Year Warranty Reliable Protection For Servers, Networking Equipment, Telecom Systems And Moreclick Here For A Larger Image Tel/Ethernet Surge Suppression, Db9/Usb Ports And Ledsclick Here For A Larger Image Ideal For Protection Of Data Center/Network Equipmentthe Smart1500Slt Provides Advanced Automatic Voltage Regulation, Reliable Battery Backup And Comprehensive Power Management Capability In A Compact Tower Form Factor. Featuring Eight Outlets And Usb/Db9 Ports, The Smart1500Slt Offers A Complete Power Protection Solution For Protection For Servers, Storage Devices And Telecom Equipment. Advanced Automatic Voltage Regulation (Avr)Advanced Avr Protects Connected Equipment From Incremental Hardware Damage, Data Loss And Performance Problems That Can Be Caused By Brownouts (Low-Voltage Conditions) And Overvoltages. The Smart1500Slt Can Correct Brownouts As Low As 83V And Overvoltages As High As 145V, Providing Safe Computer-Grade Power To All Connected Components Without Consuming Backup Battery Power Needed To Support Equipment Through Blackouts. Reliable Battery Backupups Battery Backup Keeps Connected Equipment Operational Through Short Power Failures, And Provides Time To Save Data And Perform An Orderly System Shutdown In Case Of A Prolonged Blackout. The Smart1500Slt Features A Large Internal Battery That Provides 8 Min. Of Battery Support For A Full Load (900 Watts) And 20 Min. For A Half-Load (450 Watts). During Normal Operation, Incoming Utility Power Keeps The Ups Battery Fully Charged So That Backup Power Will Always Be Available If Needed. Highly Efficient Operation Reduces Btu Outputthe Smart1500Slt Features High-Efficiency Operation-Up To 95%-That Can Significantly Reduce A Facility'S Energy Costs By Minimizing Heat Output, Lowering Cooling Requirements And Reducing The Consumption Of Electricity. Tel/Ethernet Surge Suppression And Emi/Rfi Line Noise Filteringa Sudden Power Surge Or Spike On A Phone Or Network Line Can Damage Or Destroy Electronic Components And Wipe Out Irreplaceable Data. The Smart1500Slt Features One Set Of Tel/Ethernet (Rj45) Jacks That Provide Surge Protection For A Standard Phone Or Network Connection (Cable Not Included). Its 690-Joule Surge Suppression Rating Protects Connected Components And Data From The Harmful Effects Of Power Surges. Various Electrical And Radio Sources Can Cause Disruptive Interference On The Ac Line. This Line Noise Is A Common Cause Of Incremental Hardware Damage, Data Corruption And Audio/Video Performance Problems. The Smart1500Slt Incorporates Technology That Filters Out Disruptive Line Noise, Preventing It From Affecting Your Equipment. Poweralert Smart1500Slt Runtime Chartclick Here For A Larger Image Usb/Db9 Ports, Snmp Capability And Included Poweralert Softwarethe Smart1500Slt Features A Usb Port And A Db9 Port (Cables Included). Used With Tripp Lite'S Included Poweralert Software These Communication Ports Provide Comprehensive Network Power Monitoring And Control. Capabilities Include Ups And Line Power Status Messaging (On Battery, Low-Battery, Power Restored, Ac Line Voltage, Dc Battery Voltage And Remaining Battery Capacity), Timed Inverter Shutoff After Unattended Shutdown, And Ups Output Power Control For Delayed Or Immediate Reboot Of Connected Devices. The Smart1500Slt Also Accepts An Optional Snmpwebcard Accessory That Enables The Ups To Operate As A Managed Device On The Network. Front-Panel Led Displaythe Smart1500Slt Features An Array Of Nine Front-Panel Leds That Show Line Power, Battery Power, Avr, Overload And Replace Battery Status, Including A Pair Of Three-Level Led Meters To Indicate The Ups Load Level And Battery Charge Level. Versatile Installation Optionsthe Smart1500Slt'S Compact Tower Form Factor Make
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What is the power capacity of the Tripp Lite SMART1500SLT?A: The power capacity is one thousand five hundred volt-amperes or nine hundred watts. This ensures reliable backup power for servers and networking equipment.
Q: What are the dimensions of the SMART1500SLT UPS?A: The dimensions are thirteen point twenty-seven inches in length, six point seventy-five inches in width, and ten point twenty-five inches in height. Its compact design makes it suitable for various setups.
Q: What material is the SMART1500SLT UPS made of?A: The SMART1500SLT is constructed from metal. This provides durability and protection for the internal components.
Q: How do I connect devices to the SMART1500SLT UPS?A: You can connect devices through eight battery-supported AC outlets. The UPS also includes tel/Ethernet line protection for additional connectivity.
Q: Is the SMART1500SLT suitable for protecting telecom systems?A: Yes, the SMART1500SLT is ideal for protecting telecom systems. It features advanced voltage regulation and surge suppression to safeguard sensitive equipment.
Q: How do I use the PowerAlert software included with the UPS?A: You can use the PowerAlert software to monitor UPS status and perform unattended shutdowns. It connects via USB or DB9 ports to provide comprehensive management.
Q: How can I maintain the SMART1500SLT UPS in good condition?A: To maintain it, regularly check the battery status and ensure proper ventilation. Avoid exposing it to extreme temperatures and humidity.
Q: What is the warranty period for the SMART1500SLT UPS?A: The warranty period is two years. This ensures you receive support for any manufacturing defects or issues during that time.
Q: Can I use the SMART1500SLT UPS for a data center?A: Yes, the SMART1500SLT is well-suited for data centers. Its features include automatic voltage regulation and battery backup for essential equipment.
Q: What should I do if the SMART1500SLT UPS arrives damaged?A: If it arrives damaged, contact customer support immediately for assistance. They can guide you through the return or replacement process.
Q: How long can the SMART1500SLT UPS provide backup power?A: It can provide eight minutes of backup power at full load and twenty minutes at half load. This allows time to save data during outages.
Q: Is the SMART1500SLT UPS energy efficient?A: Yes, it operates at up to ninety-five percent efficiency. This reduces energy costs and minimizes heat output in facilities.
Q: What type of surge protection does the SMART1500SLT offer?A: It offers tel/Ethernet surge suppression with a six hundred ninety-joule rating. This protects connected devices from damaging power surges.
Q: Does the SMART1500SLT UPS support SNMP management?A: Yes, it supports SNMP management with an optional SNMPWEBCARD accessory. This allows it to function as a managed device on the network.
Q: How often should I check the battery of the SMART1500SLT UPS?A: You should check the battery status regularly, at least once a month. This ensures the UPS is ready to provide backup power when needed.
Q: What is the input voltage range for the SMART1500SLT UPS?A: The input voltage range is from ninety-one volts to one hundred forty-five volts. This allows it to maintain nominal output without battery use.
