Note:1.This product power from POE, need to connect with a 802.3AF Standard 48V POE Switch.2.This camera default 5MP & H.265, if your NVR do not support 5MP or H.265, you can change our camera into 1080P (2MP) and H.264.3.IP camera will create more heat and the case of this camera is small, so after you operate the camera for a while, you will feel the camera is hot. And do not worry, it is normal and safe, hope you can understand.* High Resolution 5.0 Megapixel 1/3 CMOS Sensor* 5MP 2880*1620P resolution* Support POE, reduce the trouble of cable arrangement.* Have auxiliary power connector, can use like a Non-POE IP camera.* Also support H.264 encode, so it can be compatible with both H.264 and H.265 device.* Support web interface of IE8.0 and above (device embedded Web Server), Edge, Chrome, Firefox, Safari browser.* Support iPhone, Android smartphone* P2P Remote Viewing* Support Motion detection, Email Alarm function* Metal Material ShellCameraModel: I706-2-POE-TSResolution: 2880 x 1620P 5.0 Mega Pixels cameraSensor: FH8852V310+GC5063Min illumination: 0.1Lux @(F1.2,AGC ON)Frame rate: 20fpsLens: 3.7mm Pinhole LensO NVIIF compliant Port: 8088Lens interface type: M12Shutter: 1/25 seconds -1/100,000 secondsCompression Format: H.265/H.264Storage: NVR or ComputerIP address: Static (Default 192.168.1.108) / DynamicSmart alarm: Motion detection, Email alarmSupport protocol: HTTP, TCP/IP, RTSP, RTP, UPNP, SMTP, DHCP, DDNS, DNS, FTP, NTPGeneral function: A key recovery, dual stream, password protection, video hidingEthernet: 10M/100M mbps Ethernet (RJ-45)GeneralOperating Temperature: -25C~60COperating Humidity: 10%~90%Power Supply: POEDimension(cm): 5.7 x 4.4 x 3.9cmWeight: 0.2kgPackage contents: 1 x Camera1 x User Manual1 x Screws Set
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
