Extend Your Gigabit Or Fast Ethernet Network Over Multi Mode Fiber Up To 550 M - 0.34 Miles - (Using 850 Nm Wavelength Sfp Module That Comes Free Already Installed In Sfp Slot) With Ease An-Um-Smc-As-J+Mm-Sfp-Kit Will Automatically Detect 10 Mbit/S Or 100 Mbit/S Fast Ethernet Or 1000 Mbit/S Gigabit Port - You Just Need Plug In The Cables And It Will Work Right Away! Powering It Up? Easy, It Will Come With Ac Power Adapter In Set, Just Plug It! All These Important Features Are All Supported: Compliant With Ieee 1000Base-T And 1000Base-Sx One 10/100/1000Base-T Rj-45 Port Autosensing Featured One 1000Base-Sx Multi Mode Dual Fiber Port Sfp Type Port With Lc Type Connector - Up To 550 M (0.34 Miles) Distance Status Led Indicators For Power, Link/Activity, Full-Duplex, And Speed Standards: Ieee802.3Z/Ab 100/1000/1000Base-T 1000Base-Sx Power Supply: 100 To 240Vac 50 To 60Hz Dimensions: 70.5Mm(L)X94Mm(W)X26.5Mm(H) Environment: Relative Humidity; 5% To 90% Operating Temperature: 0 To 70 Degree Celsius Ce, Fcc, Rohs, Lvd Certified Supports Jumbo Ethernet Frames Up To 9000 Bytes (If Needed, Configurable By Dip Switches) Supports Llf Feature - Link Loss Feature - (If Needed, Configurable By Dip Switches) Media Converter Will Extend Your Lan Network With Any Standard Ethernet Interface To Distances With 550 Nm (0.34 Miles) Or Less - You No Need To Use Attenuator Also For Significantly Less Distances Than 550 Nm (0.34 Miles) As Well. Setup Of These Units Are Really Easy As The 3 Steps Shown In Picture Gallery, And All Default Settings Will Work For All Of Your Cases, But For Sophisticated Users We Had Created Some More Customized Settings Available Via Dip Switches On Unit'S Back Panel. It'S Always Good To Have Versatile And Adaptive Unit To All Your Cases!
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What are the dimensions of the Multimode LC Gigabit Fiber Media Converter?A: The dimensions are seventy point five millimeters in length, ninety four millimeters in width, and twenty six point five millimeters in height.
Q: What type of material is used in the construction of this media converter?A: The media converter does not specify a material; it is primarily made of electronic components housed in a plastic casing.
Q: What is the voltage and power supply compatibility for this device?A: The power supply is compatible with one hundred to two hundred forty volts AC at fifty to sixty hertz.
Q: How do I set up the Multimode LC Gigabit Fiber Media Converter?A: To set it up, simply plug in the optical port and UTP port; it will work immediately without any additional configuration.
Q: Can I use this media converter with existing fiber nodes?A: Yes, it supports dual speed fiber mode, allowing for easy interconnection with existing fiber nodes.
Q: Is this media converter suitable for outdoor use?A: No, it is designed for indoor use, with an operating temperature range of zero to seventy degrees Celsius.
Q: How should I care for the Multimode LC Gigabit Fiber Media Converter?A: Keep the device in a dry environment with a relative humidity of five to ninety percent to ensure optimal performance.
Q: What safety certifications does this media converter have?A: It is CE, FCC, ROHS, and LVD certified, ensuring it meets safety and environmental standards.
Q: How do I clean the media converter?A: To clean it, use a soft, dry cloth to wipe the exterior; avoid using liquids as they may damage the electronics.
Q: What should I do if the media converter does not power on?A: Check the power supply connection and ensure it is plugged into a working outlet; if it still doesn't work, contact customer support.
Q: Can I return the media converter if I am not satisfied?A: Yes, you can return it according to the store's return policy, typically within thirty days of purchase.
Q: Does this media converter support Jumbo Ethernet frames?A: Yes, it supports Jumbo Ethernet frames up to nine thousand bytes, configurable by dip switches.
Q: What is the warranty on the Multimode LC Gigabit Fiber Media Converter?A: The device typically comes with a one-year warranty against manufacturing defects, but check with the retailer for specifics.
Q: Is the media converter compatible with both Gigabit and Fast Ethernet?A: Yes, it automatically adapts to ten Mbit/s, one hundred Mbit/s, or one thousand Mbit/s speeds.
Q: What features enhance this media converter's performance?A: It features Link Loss Forwarding, status LED indicators, and support for Jumbo frames, improving overall TCP performance.