Installation Steps: 1. Open The Back Cover From The Screw Hole, Take Out The Pcba Motherboard, And Insert The M.2 Nvme Ssd Into The Motherboard M.2 Interface; 2. Install The Screw To Fix The Hard Disk So That The Ssd Is Close To The Screw Hole; 3. From The Back Of The Motherboard Fasten The Screws To Fix The Ssd; 4. Align The Sliding Grooves, Put The Pcba Motherboard Into The Aluminum Case, Push It Toward The Type-C Interface End, And Lock The Screws To Fix It To Complete The Installation. Product Name: M.2 Ngff/Nvme Ssd Hard Disk Enclosure Product Model: M2Pv-C3 Main Control: Rtl9210B Transmission Speed: Nvme Protocol-10Gbps; Sata Protocol-6Gbps Material: Aluminum Alloy + Abs Plastic Color: Black Size: 108Mm(L) *32Mm(W)*11.5Mm(H) Output Interface: Vusb3.1 Gen2 Type-C Transmission Rate: Ngff: 5Gbps, Nvme: 10Gbps Data Cable: Usb Type-A To Type-C, 0.15M; Usb Type-C To Type-C, 0.15M; Power-On Status: Blue Light Is Always On; Transmission Status: Blue Light Flashing; Only Sleep: 10 Minutes Without Reading And Writing, Automatically Enter Sleep To Reduce Hard Disk Loss Packaging: 1. Eluteng Type-C M.2 Nvme 10G Hard Disk Box; 2. Type-A To Type-C And Usb Type-C To Type-C Data Cables; 3. Lanyard; 4. Thermal Pad; 5. User Manual
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
