Set Of Four (4X) Bourns 500K Long Split Shaft Audio Taper Low Friction Potentiometers With A Pair Of .022Uf/200V Orange Drop Polypropylene Capacitors. Bourns Are A Nice Quality Alternative To Cts Pots. These Audio Taper Pots Are Suitable For Both Tone And Volume Controls. Some Of The Features Of This Pot Are: 500K Ohms/15% Tolerance Audio Taper Low Friction Rotation Solid Brass 3/8'' (Short Shaft) Bushing Split, Coarse 18-Tooth, Knurl, .236'' Diameter Shaft Each Pot Comes With Hardware - 2 Nuts & Dress Washer Requires 3/8'' Diameter Mounting Hole Note:1. If You Are Uncertain Whether Your Guitar Uses Short (3/8'') Or Long (3/4'') Shaft Pots, As A General Rule This Pot Will Fit Most Usa-Made Gibson Les Paul'S Manufactured After 1977 (Those With A Control Plate), Les Paul Studios, And Excluding Historic Reissues, But Please Double Check Before You Order. 2. Make Sure To Pinch The Tip Of The Shaft Before You Try Fitting A Knob, This Will Avoid Getting Knobs Stuck Before You Install The Pot. If You'Ve Ever Had That Happen...
⚠️ WARNING (California Proposition 65): This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Q: What is included in the product set?A: The product set includes four Bourns five hundred K long split shaft audio potentiometers and two .022 microfarad Orange Drop capacitors.
Q: What is the resistance of the potentiometers?A: The potentiometers have a resistance of five hundred K Ohms with a tolerance of fifteen percent.
Q: What is the diameter of the shaft on the potentiometers?A: The shaft diameter is .236 inches, which features a coarse eighteen-tooth knurl.
Q: What type of materials are used in the product?A: The capacitors are made of polypropylene, known for its durability and effectiveness in audio applications.
Q: What is the mounting hole size required for installation?A: The potentiometers require a three eighths inch diameter mounting hole for proper installation.
Q: How do I install the potentiometers in my guitar?A: To install, you'll need to create a three eighths inch diameter hole and secure the potentiometer with the included hardware.
Q: Are these potentiometers suitable for all types of guitars?A: These potentiometers are suitable for most USA-made Gibson Les Paul guitars manufactured after nineteen seventy-seven, but please verify your model.
Q: How do I avoid damaging the shaft when fitting knobs?A: To prevent damage, pinch the tip of the shaft before fitting a knob, which helps avoid getting knobs stuck.
Q: What are the recommended applications for these potentiometers?A: These audio taper pots are ideal for both tone and volume control applications in electric guitars.
Q: How should I care for my potentiometers and capacitors?A: Keep the potentiometers and capacitors dry and clean; avoid exposing them to moisture or extreme temperatures.
Q: What should I do if I receive a damaged product?A: If the product arrives damaged, please contact customer support for assistance with returns or replacements.
Q: Is there a warranty on this product?A: Yes, this product typically comes with a manufacturer's warranty, which covers defects in materials and workmanship.
Q: How long can I expect these components to last?A: With proper care, these potentiometers and capacitors can last for many years, providing reliable performance.
Q: Can beginners use these potentiometers?A: Yes, beginners can use these potentiometers, especially with guidance on installation and fitting.
Q: What makes Bourns potentiometers different from CTS pots?A: Bourns potentiometers provide a good quality alternative to CTS pots, offering low friction rotation and reliable audio taper.
Q: How do I know if I need short or long shaft pots?A: As a general rule, short shaft pots will fit most USA-made Gibson Les Pauls manufactured after nineteen seventy-seven.