Waveshare Compute Module 3+/32Gb Raspberry Pi 3 Model B+ In A Flexible Form Factor With 32Gb Emmc Flash Standard Ddr2 Sodimm Connector
$78.89
Taxes will be calculated at Checkout.
US Delivery Time: 3-5 Business Days.
US Delivery Time: 3-5 Business Days.
Product Description
Waveshare Compute Module 3+/32Gb Raspberry Pi 3 Model B+ In A Flexible Form Factor With 32Gb Emmc Flash Standard Ddr2 Sodimm Connector
Overview The CM3+/32GB Compute Module contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB RAM) as well as an 32GB eMMC Flash device (which is the equivalent of the SD card in the Pi). This is all integrated onto a small (67.6mm ? 31mm) board that fits into a standard DDR2 SODIMM connector. The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because the Pi Foundation has put all the tricky bits onto the Module itself. CM3+ Features Broadcom BCM2837B0 Cortex-A53 (ARMv8) 64-bit SoC 1.2GHz 1GB RAM eMMC Flash CM3+/Lite: None, but brings the SD card interface to the Module pins so a user can wire this up to an eMMC or SD card CM3+/8GB: 8GB CM3+/16GB: 16GB CM3+/32GB: 32GB 200PIN SODIMM connector (35U hard gold plating I/O pins) 48 x GPIO 2 x I2C 2 x SPI 2 x UART 2 x SD/SDIO (1x SD has been used for eMMC Flash on non-Lite variants) 1 x HDMI 1.3a 1 x USB2 HOST/OTG 1 x DPI (parallel RGB display) 1 x NAND(SMI) 1 x 4-lane CSI Camera Interface (up to 1Gbps per lane) 1 x 2-lane CSI Camera Interface (up to 1Gbps per lane) 1 x 4-lane DSI Display Interface (up to 1Gbps per lane) 1 x 2-lane DSI Display Interface (up to 1Gbps per lane) Compared to CM1, the CM3+ supports more OS, like Windows 10 (the free IOT-specific version from Microsoft) PACKAGE CONTENT Compute Module 3+ 32GB x1Features of Waveshare Compute Module 3+/32Gb Raspberry Pi 3 Model B+ In A Flexible Form Factor With 32Gb Emmc Flash Standard Ddr2 Sodimm Connector
The CM3+/32GB Compute Module contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB RAM) as well as an 32GB eMMC Flash device (which is the equivalent of the SD card in the Pi). This is all integrated onto a small (67.6mm ? 31mm) board that fits into a standard DDR2 SODIMM connector. The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because the Pi Foundation has put all the tricky bits onto the Module itself. Broadcom BCM2837B0:Cortex-A53 (ARMv8) 64-bit SoC 1.2GHz,1GB RAM 200PIN SODIMM connector (35U hard gold plating I/O pins) Compared to CM1, the CM3+ supports more OS, like Windows 10 (the free IOT-specific version from Microsoft)Specification of Waveshare Compute Module 3+/32Gb Raspberry Pi 3 Model B+ In A Flexible Form Factor With 32Gb Emmc Flash Standard Ddr2 Sodimm Connector
| Product Details | |
|---|---|
| Color | Compute Module 3+ 32 |
| Size | Compute Module 3+ 32GB |
| Weight | 0.02 |
Warning - California Proposition 65 This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.