Product Description
Impact SF-ABRL160 Stand Mount Flash with LED Modeling Light
The
Impact SF-ABRL160 Stand Mount Flash with LED Modeling Light is a lightweight monolight with straightforward features that make it ideal for most applications. The 160 watt second strobe features a bright LED modeling lamp that, unlike its quartz counterparts, is virtually maintenance-free. And instead of lasting 100 hours, the LED typically lasts approximately 25,000 hours.
The SF-ABRL160 has a built-in optical slave for wireless triggering, a sync cord for direct firing from your camera, a built-in umbrella receptacle, and a 5/8" standard stand mount. It accepts Impact's 50 x 50 cm (FF-SB50) and 50 x 70 cm (FF-SB70) Softboxes without a speed ring thanks to the head's built-in flex rod holes. An easy-to-mount barndoor set with filters, filter frame, and a honeycomb grid (SF-BDK) are available as optional accessories, as is a snoot (SF-SNT) with its own removable grid. Selectable flash output is full and 1/2 power.
Maximum Watt/Seconds: 160
Flash Variability: Full and 1/2 power
Modeling Light: LED with On/Off switch
Flash Ready Indicator: Yes
Operating Voltage: 120VAC
Built-in Slave Cell: Optical
Sync Socket: Mini (3.5mm) phone
Fan Cooled: No
Dimensions: 7.5 x 6.5 x 4.2" (19.0 x 16.5 x 10.7 cm) [lenght x height x diameter]
Weight: 1.5 lbs (680 g)
Features of Impact SF-ABRL160 Stand Mount Flash with LED Modeling Light
160 Watt-SecondsLightweight Polycarbonate DesignAccepts Softboxes Without Speed Ring5.8" Stand MountBuilt-in Umbrella ReceptacleOptical SlaveIncludes PC to Mini Sync CordWhats In The Box: Flash Tube, Power Cord, PC to Mini (3.5mm) Sync Cord, 1-Year Limited Warranty
Specification of Impact SF-ABRL160 Stand Mount Flash with LED Modeling Light
Product Details |
---|
Dimensions | 7.7x6.9x4.5 |
Warning - California Proposition 65
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.