Frm220E1T1Rsc02A T1 Rj45 100Ohm And E1 120Ohm To Single Strand Bidi Tx850Nmrx1310Nm Multimode Fiber Media Converter

The Frm220E1T1Rsc02A Is A Bidirectional Fiber Media Converter For G703 T1 Or E1 Dip Switch Selectabletransmissiontransport Over Fiber Optic And Features An Rj48C Connector For Connection To 100 Ohm Or 120Ohms For E1 Twisted Pair Wiring Frm220E1T1Rsc02A Operates On Single Strand Multimode Fiber Up To 2Km 14Mi Distance Using Wdm Technology With Tx850Nm And Rx1310Nm The New Model Replaces The Old Equivalent Fib1T1R Series And Adds A Few Extras The Unit Is Now Supporting Both T1 And E1 Interfaces For Transport A Number Of Dip Switches Allow All Settings To Be Made Without A Pc The New Frm220E1T1R Supports Also Local Console Management When Ordered With The Frm220Ch01Mac Optional Casing And Also Can Be Web Managed Besides The Snmp If Installed In Any Frm220 Series Chassis That Has Also An Frm220Nmc Management Card The Fiber Media Converter Is Equipped With Single Sc Type Optical Connector Such Media Converter Is Also Sometimes Called T1 Fiber Modem Management Features Provide Information On The Card Status Type Version Fiber Link Status E1 Or T1 Link Status And Alarms Type Of Alarms Configuration Is Also Available To Enable Or Disable The Port Reset The Port Do Far End Fault Setting And Initiate Local Or Far End Loopback Tests For The Bidirectional Modem An A Type Converter Must Be Always Matched With A B Type Converter The Models Are Using Complementary Wavelengths 850Nm And 1310Nm To Communicate Over Just One Strand Of Fiber

Features of Frm220E1T1Rsc02A T1 Rj45 100Ohm And E1 120Ohm To Single Strand Bidi Tx850Nmrx1310Nm Multimode Fiber Media Converter

Standards: T1: ITU-T G.703, G.704, G.706, G.732, G.823, AT&T TR-62411, ANSI T1.403; Interfaces: RJ48c 100ohms balanced T1 or RJ48c 120ohms balanced E1 connector and single SC connector 155M fiber port

Operating wavelength: Tx:850nm/Rx:1310nm (A type BiDirectional, must be matched with B type model for a working pair); Operating distance: 2Km on 50/125um or 62.5/125um fiber; Optical connector: single SC connector

Front LEDs: Power, Fiber Link, E1/T1 SIG, Test mode; Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug

Temperature: 0~60C (Operating); 0~70C (Storage); Humidity: 10~90% non condensing; Consumption: less than 5W

Dimensions(WxDxH): 88mm x 155mm x 23mm; Weight: 210g (without AC adapter); Compliance: CE, FCC Class A, LVD, RoHS; MTBF: 65,000 hours

Specification of Frm220E1T1Rsc02A T1 Rj45 100Ohm And E1 120Ohm To Single Strand Bidi Tx850Nmrx1310Nm Multimode Fiber Media Converter

Product Details
Dimensions	8X3X6
Weight	1