Wireless Cc2652P Usb Dongle Zigbee Pack Sniffer Protocol Analysis + Antenna

This product is a double-sided patch, and the back is Serial Port cH9102X conversion chip, power chip and electrostatic (ESD) protection circuit Tiny USB stick or dongle, adapter of development board for 24g multiprotocol RF FEATURES: 1 24gHz multiprotocol RF development board(OpenThread,Zigbee,BLE,IEEE802154,6L oWPAN and proprietary) based on TI cc2652P1FRgZR chip 2 communicates with the host computer via the common cH340E USB-UART bridge 3 cJTAg debug header, flashed firmware or debug with JTAg 3 Self-programming via the TI serial bootloader with bootloader bit enabled 4 SMA antenna port for an external antenna with personal choice 5 general LEDs(Red--Power on indication green--DIO7 Blue--DIO6) 6 Low power LDOs 7 ESD protections with USB interface 8 easy to use with Koenkks zigbee2mqtt 9 easy to use with TIs OpenThread border router Features: Power indicator: Indicates the power status After connecting the programmer or the USB port, the indicator lights up Programming port & debug port: used to connect XDS110 or other suitable programmers Two programming methods: 1: Use XDS110 connect the XDS110 with an adapter cable, and turn it on after connecting 2: Use the USB port to download in BOOTLOAD mode Insert the DONgLE into the USB port of the computer, after identifying the serial port ( cH9102X driver), open the software, select the corresponding chip, and download it If the program has been downloaded in the chip, you need to manually enter the BOOTLOAD mode, after connecting the USB, press and hold the RESET button, press and hold KEY1, then release the RESET, and then release the KEY1 button, then the device will enter the BOOTLOAD mode Package Included: 1*Wireless cc2652P USB Dongle Zigbee + Antenna

Features of Wireless Cc2652P Usb Dongle Zigbee Pack Sniffer Protocol Analysis + Antenna

The main chip adopts Wireless cc2652P, Serial Port cH9102X, a multi-protocol wireless McU with integrated amplifier Easy access to Home Assistants ZHA integration or Zigbee2Mqtt plugin You can also access HassIO in OpenWrtUSB port conversion Serial Port cH9102X, online identification with Electrostatic Discharge (ESD) protection Support Bluetooth 52 Low Energy, Thread, Zigbee 30 protocols After connecting the programmer or USB port, the power indicator is on The left indicator is red, which is connected to DIO6 of cc2652P, and the right indicator is green It is connected to DIO7 of cc2652P, and the programming port and debugging port are used to connect XDS110 or other suitable programmers Reset button: used to reset the cc2652P chip, used to enter BOOTLOAD mode or other situations that need to be reset USB port: USB to serial port, the conversion Serial Port cH9102X SWITcH chip control: use DIO28, DIO29 control KEY1: connect to DIO15, it will be low level after being pressed KEY2: connect to DIO14, it will be low level after being pressed Two programming methods: 1: Use XDS110 connect the XDS110 with an adapter cable, and turn it on after connecting 2: Use the USB port to download in BOOTLOAD mode Insert the DONgLE into the USB port of the computer, after identifying the serial port (cH9102X driver), open the software, select the corresponding chip, and download it Satisfactory Service]: Please contact us after purchase, we will send you the installation program and product instruction manualWe Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not support), we will give you a perfect solution

Specification of Wireless Cc2652P Usb Dongle Zigbee Pack Sniffer Protocol Analysis + Antenna

Product Details
Dimensions	3.94X3.55X0.79
Weight	0.05