UES Sensor Cleaning kit for Full-Frame Digital Cameras (14 X 24mm Swabs + 15ml Sensor Cleaner)
US Delivery Time: 3-5 Business Days.
Product Description
UES Sensor Cleaning kit for Full-Frame Digital Cameras (14 X 24mm Swabs + 15ml Sensor Cleaner)
UES FFR24 Professional Camera Sensor Cleaning Kit
The 24mm sensor cleaning swabs have extremely soft head. The head cover is made of super fine microfiber cloth which is soft to your sensor and hard to the dirt.
Each swab is packed in a vacuumed package ensure 100% dust free.
The powerful cleaning liquids are specially formulated for digital camera sensor cleaning. It dries quickly.
Instruction for Achieving the Best Cleaning Result:
1. Before start, shoot a piece of white paper with Aperture Priority (A) mode set at f/22 or higher. You can see where the dust is located on the sensor.
2. You need to set your camera to a special clean mode, so the delicate shutter and mirror mechanisms stay out of the way when you clean the sensor.
3. Go to your camera setup, and select Lock Mirror Up For Cleaning. This option will be greyed out unless your cameras battery is fully charged. For Cameras that do not have the lock mirror up function, you could set your camera exposure on Bulb. The Bulb setting will allow you to keep the mirror up until you release the shutter.
4. Remove the lens. Use the air blower to blast the dust from the sensor. Be careful, do not touch the sensor or other internal components with the blower tip.
5. Take out sensor cleaning swab from the vacuum package. Drip 1-2 drops of UES Sensor Cleaning Liquids to the head of the swab. Dont use too much liquid.
6. Drag the swab slowly and smoothly from the left of the sensor to the right. Use a single movement, and dont rub or scratch at the sensor.
7. Turn the swab 180 degrees and drag the clean side from right to left. Throw this swab away. Never reuse used swabs.
8. Turn the camera off to reset the mirror.
9. Install the lens and shoot a piece of white paper with Aperture Priority (A) mode set at f/22 or higher. You will find out if the dust or dirt is cleaned. If dust remains, repeat the steps A to G.
Features of UES Sensor Cleaning kit for Full-Frame Digital Cameras (14 X 24mm Swabs + 15ml Sensor Cleaner)
Package includes 14pcs 24mm Sensor Cleaning Swabs for Full-Frame Sensors and 15ml Sensor Cleaner. Every sensor cleaning swab is made in a Class 100 Clean-Room and sealed in a vacuum package. Flexible swab rod with a mini channel enables the pressure on the swab head evenly across the sensor. Ultra pure water-based sensor cleaner has non-aggressive formula. The sensor cleaner is safe for both CCD and CMOS sensors.Specification of UES Sensor Cleaning kit for Full-Frame Digital Cameras (14 X 24mm Swabs + 15ml Sensor Cleaner)
| Product Details | |
|---|---|
| Size | Full-Frame |
| Dimensions | 7.87X1.10x5.51 |
| Weight | 0.22 |
Product FAQs
Q: How many sensor cleaning swabs are included in the kit?
Ans: The UES Sensor Cleaning kit for Full-Frame Digital Cameras includes 14pcs of 24mm Sensor Cleaning Swabs.
Q: Is the sensor cleaner safe for both CCD and CMOS sensors?
Ans: Yes, the ultra pure water-based sensor cleaner included in the kit is safe for both CCD and CMOS sensors.
Q: What is the size of the sensor cleaning swabs?
Ans: The sensor cleaning swabs are 24mm in size, suitable for Full-Frame sensors.
Q: How should I store the sensor cleaning swabs?
Ans: Each swab is packed in a vacuumed package to ensure they are 100% dust-free. It is recommended to store them in a cool, dry place.
Q: Can the sensor cleaning swabs be reused?
Ans: No, it is recommended to use each sensor cleaning swab only once and then discard it. Reusing swabs may lead to ineffective cleaning or potential damage to the sensor.
Warning - California Proposition 65 This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.