Tycon Systems EZBR-0214HD- 2.4GHz Industrial Strength Point to Point Bridge System
$620.54
![](image/SSH_FS_icon.png)
Taxes will be calculated at Checkout.
US Delivery Time: 3-5 Business Days.
US Delivery Time: 3-5 Business Days.
Product Description
Tycon Systems EZBR-0214HD- 2.4GHz Industrial Strength Point to Point Bridge System
The EZ-Bridge LT+ HD is a high power 25dBm (316mW) outdoor wireless bridge system operating in the 5GHz unlicensed frequency spectrum providing real world throughput up to 100 Mb/sec. It complies with the 802.11g/n or 802.11a/n standards to insure interoperability. The EZBridge LT+ HD creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. It supports VOIP, VPN, multiple MAC addresses and DHCP across the wireless link. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-Bridge LT+ HD units can be connected in a mesh configuration to allow interconnecting more than two sites. With its password verification, MAC address authentication, SSID suppression and advanced WPA encryption, the system provides the best available wireless data security. Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power inserters. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that needs to be loaded to the computer. The EZ-Bridge LT+ HD comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 14dBi 802.11g/n or 16dBi 802.11a/n MIMO antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Surge Protected Cat5e rated 24V PoE (Power Over Ethernet) power inserters and 75 shielded outdoor rated CAT5 cable assemblies. The EZBR-0516+ management interface is IPv6 enabled, https enabled. Logon username is fixed. The password can be changed, and there are no rules for passwordFeatures of Tycon Systems EZBR-0214HD- 2.4GHz Industrial Strength Point to Point Bridge System
The EZ-Bridge LT+ HD is a high power 25dBm (316mW) outdoor wireless bridge system operating in theSpecification of Tycon Systems EZBR-0214HD- 2.4GHz Industrial Strength Point to Point Bridge System
Product Details | |
---|---|
Dimensions | 0.98X0.98x0.98 |
Weight | 0 |
![Warning](https://electroeshop.com/image/catalog/warning65.png)
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.